Wave Luxury M-1313 User Manual - Contents
Massage bathtub
Massage bathtub
Page 4 of 11
Page 7 of 11
Bathtub User’s Guide
WARNINGS
CONTENTS
1.Please follow the instruction contained in the attached installation
manual to ensure that the product is installed properly.the manuf-
acturer will not be held liable for damages or injuries caused by im-
proper installation.
2.Follow the instructions contained in this manual when using the product.
3. Before using the bathbub, check the local voltage that if reach to the
rated voltage(pre-installation card).
Schematic Diagram of control panel
1)
Foot massage pump
2)
Pump
3)
Lamp
4)
Lock
5)
Ozone
6)
Heating
8)
Channel storage/select
7)
Function setting
10)
Volume /frequency plus
11)
MP3、FM、Bluetooth、TV
9)
Volume /frequency minus
12)
Power on/off
3.Operation of Control Panel
1. When any function button works, there is a sound of “di…”
2. Press “ ”for 2 seconds to start the controller ,at the same time,
the lamp is turned on ;press the icon again to stop the controller and
all the loads is turned off.
3. If no operation with the control panel for 5 minutes,all the
keys will be locked except “LOCK”, LCD displays “LOCK”.
4.Press the power switch icon, lamp is turned on,LCD displays
“ ”;then press“ ”,lamp is turned off;press “ ”
another time,lamp is turned on.
5. Foot massage pump:
Turn on the control panel, press ( ), then foot massage pump
start. Color light jets and foot massage jets start to work. ( )
is flashing when this function is working. Press ( )again to
stop this function, and it stop flashing.
Safety Precautions
Brief Introduction
6.
Operation of Control Panel