Wave Luxury M-1313 User Manual - page 6
Massage bathtub
Massage bathtub
Page 6 of 11
Page 5 of 11
1. Safety Precautions
【W arning】
1. In order to prevent fire or electric shock accident, do not expose the controller
the rain or humid environment. There are dangerous high-tension fittings inside
the controller, therefore do not open the cover. Entrust the repairing work only
to the qualified professional repairing personnel when repairing is required.
2.Without the clear approval from the controller manufacturer or its authorized units,
any change or alternation to this controller might bring various inconveniences to
the users when in use.
to
【Helpful suggestion】
1. In order to prolong the service life of this controller, the time interval for continuously
turning on and off the machine must be over 30 seconds.
2. Please switch off the power after use.
3. The power supply used must be consistent with the voltage specified value indicated
on this controller; otherwise it will not work, or even burn out the controller.
4. When installing this controller, carefully check if the load parameters are consistent
with the parameters required by this controller, otherwise it will not work, or even burn
out the controller.
5. If it is halted accidentally, please close and restart.
2. Brief Introduction
1.General Description of Functions
Note:“*”stands for the optional function.
1
Touching Technology
√
2
Lock
√
3
Waterfall&whirlpool
√
4
Foot massage pump
*
5
Bottom Light
√
6
Thermostatic Heating
*
7
FM Digital Turning Radio
√
8
Bluetooth Audio Play
√
9
Level Detection
√
10
Ozone
*
11
Cleaning
√
Model
Functions
PB304
2.1Controller System Including:
1)Control panel(1) ;
2)Control box(1).
2.2.Characteristics of the Controller
1)Rated voltage :AC220V ~AC240V
2)Working voltage range :AC198V ~ AC248V
3)Rated power :50HZ/60HZ
4)Power consumption :< 1 0 W (all loads OFF)
5)Applied ambient temperature :+ 5℃~ +40℃
2.3Devices controlled by the controlling system
1)Water pump surf : AC220V/3HP
2)Thermostatic heating : AC220V/2000W
3)Foot massage pump : AC220V/1HP
4)Bottom lamp : DC12V/5W
5)alternate output : AC12V/6W
Loudspeaker : 8Ω/15W
AC230V Max 3HP
5.The LCD shows the following information