Waves System NanoPlayer Manual - page 12
® Waves System
V 1.0 - 2008
I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi
- 10 -
●
●
●
●
●
The 3rd digit is a figure which defines the mode for triggering files
This parameter only applies in the trigger directory «1xx». This last digit is ignored in the default directory
«0xx».
xx0 : The trigger directory is launched by an impulse in Non re-activation mode ;a new impulse during
current playback has no effect, the impulse is ignored.
xx1 : The trigger directory is launched by an impulse in Re-activation mode ; a new impulse stops
current playback to broadcast another file.
xx2 : The trigger directory is read as long as the input contact is activated. Playback stops when the
contact is released.
4.2 Organization of audio files included in the directories
As for directories, file names affect playback pattern.
●
●
●
●
●
In random mode, naming of files is free. Only the extension is meaningful: name.mp3 for MP3 files or
name.wav for WAVE files.
●
●
●
●
●
In sequential mode, i.e. in sequence order playback mode, the first characters of file names must be 3
figures which define the sequence number of the file and therefore its playback order. The first 3
figures may or may not be followed by a chosen name.
Example : «001 my song.mp3» or «001.mp3» or «001.wav» or
«001 my song.wav»
Note : If both numbered and non-numbered files are present in the
directory, only numbered files will be read in sequenced order mode.
In random mode, they will all be read.
5 - Infrared remote control
The NanoPlayer includes an infrared sensor on the front of the board and can therefore be operated with
a IR remote control. An optional ID-AL infrared remote control handsed is available.