Waves System NanoPlayer Manual - page 7
® Waves System
V 1.0 - 2008
I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi
3 - Installation
14
1
2
4
5
6
7
8
9
10
Memory card: choose a good quality card of a minimum size of 64Mo - New cards are usually
formatted in «FAT». You can also use FAT32 format for SD card above 512Mo.
Push the card without forcing. To remove, push on the card to release it.
Caution, the NanoPlayer does not have any on-off switch. The player is powered on as soon as it is
plugged in.
The SD card must be inserted or removed when the NanoPlayer is NOT POWERED ON.
The amplifier heats up. It is important to add a cooling device
whose
size must be in relation with the required power.
- 5 -
11
12
13
3
1 - Amplified audio output
2 - Line level audio output
3 - Luminous indicator
4 - Power supply
5 - Infrared detector
6 - Input contact
7 - SD card connector
8 - Secondary power supply
9 - GPS extension
10 - Input contact
11 - Volume level setting
12 - Option (Serial link)
13 - Option S/PDIF
14 - Amplifier + heat
dissipation device to be added