Webasto Air Top 3500 ST Installation Instructions Manual - page 25
Other manuals for Air Top 3500 ST:
Installation Instructions Manual, Workshop Manual, Installation Instructions Manual, Installation Instructions Manual
of
40
Air Top 3500 ST / Air Top 5000 ST
Electrical connections
57
The cable passage can be placed at either the left or right side. To
ensure that the cable passage in the control unit cover seals perfectly,
the cable grommet is to be adjusted appropriately on the wiring harness.
11.3. Supply voltage connection
Ideally from the vehicle’s central electrical system.
An additional blade terminal fuse holder is to be fitted to protect
the heater (supplied with the heater). The fuse holder may only be
installed in the interior of the vehicle.
Fig. 25: Remove the fastening plate on the fuse holder
Fig. 26: Fuse holder, installation position
F = 15A (24V)
F = 20A (12V)