Webasto Air Top Series Operating Instructions Manual

Summary of Air Top Series

  • Page 1

    Dear webasto customer, thank you for choosing a webasto air top series heater. Air top series heaters are used – to heat cabins, boats, trucks, minibuses, vans and motor-homes and – to defrost vehicle windows. We presume that the principle and mode of operation of your new heater has been explained ...

  • Page 2

    2 10. The fuel specified by the vehicle manufacturer is suitable for use in an air top series heater b (gasoline). The diesel fuel specified by the vehicle manufacturer is suitable for use in an air top series heater d (diesel). There are no known negative influences due to fuel additives when used ...

  • Page 3: Switch On

    3 control element set the rotary knob on the control element to the desired temperature. Note: to prevent the combustion air fan from scraping, ensure that there are no objects on or against the heater before you turn it on. A separate switch (optional) allows the user to choose between heating and ...

  • Page 4

    4 heater on example press the webasto button to turn heater on. Set temperature output & heater runtime example using the rotary dial and the selection button, follow these steps to set your cab temperature to 70°f with a runtime of 4 hours. 1. Press the selection button. Using the rotary dial, sele...

  • Page 5

    5 duration duration allows for the selection of continuous heater operation or timed operation (30 minutes – 14 hours in 30 minute increments). Important: timed duration is not to be mistaken for timer functionality. The duration times above are used when turning the heater on manually. I.E. Set the...

  • Page 6

    6 use the following link to obtain version specific controller operation instructions. Http://www.Techwebasto.Com/documentation/heater/recreational.Html offset depending on the installation location, the temperature reading may vary slightly. The offset feature allows a temperature adjustment of +/-...

  • Page 7: Actions In Event of Faults

    7 if an error occurs, first check the fuse and plug connections to ensure that they are in proper condition and connected correctly. If the actions described below do not rectify the error, have the heater checked by webasto- trained personnel. Cause remedy no combustion after start and repeat start...

  • Page 8

    8 if the system is fitted with a combination timer, when an error occurs an error code is dis- played on the timer's screen until the heater has been properly repaired. The error code is output if the heater is fitted with a control element after an error has oc- curred by the switch-on indicator/er...

  • Page 9

    9 1. Using switch or standard timer control, turn heater on 2. Remove the main power connection to heater from battery or pull fuse for a minimum of 20 seconds. 3. Using switch or standard timer control, turn the heater off. 4. Reinstall main heater power connection where previously disconnected. 5....

  • Page 10

    1 webasto thermo & comfort north america, inc. (hereinafter referred to as webasto) war- rants their heaters and heater kits against defects in material and workmanship for two (2) years effective at the time of installation or vehicle registration date for original equipment installation (oem). Thi...

  • Page 11

    Notes.

  • Page 12

    Webasto thermo & comfort n.A., inc 15083 north road fenton, mi 48430 technical assistance hotline usa: (800) 860-7866 canada: (800) 667-8900 www.Webasto.Us www.Techwebasto.Com org. 3/2017 p/n: 5012526a.