Webasto Air Top Series Operating Instructions Manual - page 4
4
Heater ON Example
Press the Webasto button to turn heater on.
Set Temperature Output & Heater Runtime Example
Using the rotary dial and the selection button, follow these steps to set your cab
temperature to 70°F with a runtime of 4 hours.
1.
Press the Selection button. Using the rotary dial, select: Options > Duration >
Timed > Adjust runtime to 4 hours. Confirm the adjustment by pushing the
selection button.
2.
From the main screen use the rotary dial to adjust the set temperature to 70°F;
confirm the adjustment by pushing the selection button.
NOTE: The set temperature can be adjusted quickly even when the heater is running using
the same method as above.
Set Timer Example
Set timer to turn on Friday at 6:30AM with a runtime of 60 minutes.
1.
Press the Selection button. Using the rotary dial, select Timer.
2.
Highlight the timer feature, press the Selection button. Select “edit” from the
sub-menu.
3.
Adjust and select day for Friday.
4.
Adjust and select time for 6:30AM.
5.
Adjust and select runtime for 60 minutes.
6.
Settings are saved each time the selection button is pressed.
Menu Description
Refer to Menu Descriptions Table for a detailed description of each menu item and its default
setting. Depending on the SmarTemp version, menu order may vary from order below.
Definitions
Default
Mode
Mode changes the operation of the heater between
heat mode and ventilation mode. Status indicator lights
will illuminate red for heat mode and blue for
ventilation mode when the selected mode is active.
Note: Refer to Status Indicator Light description on
page 6 for additional Status Indicator explanation.
Heat Mode
Language
Language changes between English, Spanish, and
French.
English
Temp Unit
Temp Unit changes between Fahrenheit and Celsius
units of measure.
Fahrenheit
Options
Advanced level adjustments; see below.