Webasto ALTOX WBUS-4 Owner's Manual

Summary of ALTOX WBUS-4

  • Page 1

    Owner’s manual gsm control module webasto altox wbus-4  control heaters webasto on protocol wbus  manage any heaters by analog signal  automatically identify type of heater  dtmf, sms, tcp commands and voice menu (optional)  manage and control by mobile web- application  processing any ussd-re...

  • Page 2: 1. Operation Description

    1. Operation description led net description 1. Light is on constantly checking sim, find and register in the network 2. Flashes 1 time in 3sec. Standby mode (connected) 3. Flashes 1 time in 5sec. Set gprs connects/ring/sms/ussd getting started 1. Before insert a sim-card set to off pin-code request...

  • Page 3: 2. Setup (Sms Commands)

    2. Setup (sms commands) to manage send sms command to sim-card number of the module. Possible to setup several settings at same time separated by commas. Adjustable parameters text message 1, 2. Request sms with settings 1/2 settings1 / settings2 3. Switch on the heater heater_on (or start) 4. Switc...

  • Page 4: 3. Technical Data

    Sample outgoing sms with id and setup 2: id:123456789012345 - unique id device s:"123.123.123.123","12345" - ip server address and port g:"mts","mts","mts" - apn point , user name, password f:10,60,10,5 - setup freq1, freq2, count1, count2 sample outgoing sms status message: webasto off - heater sta...