WebGate HDC400M Quick Manual

Other manuals for HDC400M: User Manual

Summary of HDC400M

  • Page 1

    English 1 package contents please unwrap the product, and place the product on a flat place or in the place to be installed. Check if the main unit and all the following accessories are included in the product package. Hdc400m dvr remote controller mouse battery hdd bracket & screw power adapter ac ...

  • Page 2

    English오류! 알려지지 않은 문서 속성 이름입니다. 2 before starting please take note of the followings before using this prod . Do not use the product in outdoor . Do not spill water or liquid in the connection part of the product . Do not impose excessive shock or force on the system. Do not pull out the power plug ...

  • Page 3

    English 3 connecting to the monitor check resolution of monitor before connection.  when using hdmi port : 1920 x 1080p ( hdmi v1.2 standard ) make sure to use a camera supporting hd-sdi standard. We stongly recommend to use hdmi certified cable when connecting dvr output to hdmi monitor connecting...

  • Page 4: Copy

    English오류! 알려지지 않은 문서 속성 이름입니다. 4 [schedule] [program] schedule recording schedule recording is recording function based on schedule set by user. Please set date, time and program. Set record mode as “schedule & event” and set each date and time. Program setup please setup re solution, frame rate or...

  • Page 5

    English 5 network setting ethernet set type as ethernet and input ip, netmask, gateway, dns provided by administrator. The way to input is using directional key or mouse wheel. Adsl(pppoe) change type for network menu into xdsl then go to xdsl menu. Change port in ethernet (user must remember port) ...

  • Page 6

    English오류! 알려지지 않은 문서 속성 이름입니다. 6 (4) connect using dvr setup port of router address in the pc using same router. (dvr default port : 80). (5) check internet address of router to access to dvr from external pc. (6) connect to dvr setup port of internet address in router. (7) webviewer installer down...