WeBoost EQO User Manual - Find The Strongest

CELL PHONE SIGNAL BOOSTER

2

Find the Strongest

Cellular Signal

Before you install your eqo signal booster, you must determine the location of the best 

available cellular signal. This will help you maximize performance from your eqo booster.

Use any of the following methods to find the strongest signal in the room where the 

booster will be installed. 

Have your cell phone set to test mode so the numerical signal strength 

can be read. This is more accurate than the bar indicator. Please note: 

The lower the number the better the signal.  Example:  -80 is a stronger 

signal than -105.

For help in finding the test mode for your phone please go to: 

weboost.com/us/test-mode-instructions/

Check the bar indicator on your cell phone display and note where the 

signal appears the strongest. Repeat your signal check several times, 

moving each time to a different location. Remember each time you 

move to a new location, your

phone may require up to 30 seconds to reset and display the new 

reading.

(Note: cell phone bars are only an approximation of signal strength and vary 

from phone to phone.) 

-80dB