WeBoost EQO User Manual

Other manuals for EQO: Installation Manual, User Manual

Summary of EQO

  • Page 1

    Need help? Support.Weboost.Com 866.294.1660 user manual cell phone signal booster user manual need help? 866.294.1660 support.Weboost.Com.

  • Page 2: ______

    Package contents 1 step 1: find the dbm reading on your phone 2 step 2: place booster in strong signal location 3 step 3: place antenna in weak signal location 4 step 4: connect the system 5 troubleshooting 6 specifications 8 safety guidelines 9 warranty 10 ______ index.

  • Page 3: ________

    Cell phone signal booster 1 ________ package contents eqo booster eqo antenna coax cable power supply this device may be operated only in a fixed location for in-building use. The signal booster unit is designed for use in an indoor, temperature controlled environment (.

  • Page 4: ______

    2 cell phone signal booster dial *3001#12345#* then press call. Hold down power button until you see “slide to power off” then release the power button. Hold the home button until your main screen appears. If you want to check 3g/1x but your iphone is picking up 4g/ lte signal, go to settings>cellul...

  • Page 5: ______

    Cell phone signal booster 3 ______ step 2: place booster in strong signal location important: this is the most critical step of the installation process because it will determine the overall performance of the booster system. You must determine the location of the best available cellular signal to m...

  • Page 6: ______

    4 cell phone signal booster 15’ to 20’ 15’ to 20’ 15’ to 20’ 15’ to 20’ 15’ to 20’ 15’ to 20’ antenna location antenna location antenna location antenna location antenna location booster booster antenna the eqo booster and antenna should face the same direction 15 to 25 feet separation distance. Imp...

  • Page 7: ______

    Cell phone signal booster 5 2 connect the other end of the coax cable to the antenna. Note: you can mount the antenna on a wall by removing the soft cover. 3 plug the booster in. The light may change colors for the first 15 seconds. Check your coverage area. Refer to troubleshooting section if neede...

  • Page 8: ______

    6 cell phone signal booster ______ troubleshooting fixing red light issues this section is only applicable if the booster light is red and you are not experiencing the desired signal boost. After each step, always un-plug and re-plug the power supply so the booster can update the signal reading. Alw...

  • Page 9: ______

    Cell phone signal booster 7 5. If the solid orange light persists, and you are not experiencing the desired signal boost, more advanced troubleshooting may be necessary through weboost customer support at support.Weboost.Com or contact 866.294.1660. Light off if the eqo booster’s light is off, verif...

  • Page 10: ______

    8 cell phone signal booster ______ specifications eqo booster product number u473020 model number 460032 fcc id: pwo460032 ic: 4726a-460032 connectors sma-female antenna impedance 50 ohms frequency 698-716 mhz, 729-756 mhz, 777-787 mhz, 824-894 mhz, 1850-1990 mhz, 1710-1755/2110-2155 mhz passband ga...

  • Page 11: ______

    Cell phone signal booster 9 ______ safety guidelines warnings to uphold compliance with network protection standards, all active cellular devices must maintain at least six feet of separation distance from inside panel and dome antennas and at least four feet of separation distance from desktop and ...

  • Page 12: ______

    2 year warranty weboost signal boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal boosters may also be returned directly to the manufacturer ...