WeBoost EQO User Manual - ______
Other manuals for EQO:
Installation Manual, User Manual
of
12
CELL PHONE SIGNAL BOOSTER
5
2
Connect the other end of the
Coax
Cable
to the Antenna.
Note: You can mount the Antenna on a
wall by removing the soft cover.
3
Plug the Booster in. The light may
change colors for the first 15 seconds.
Check your coverage area. Refer
to TROUBLESHOOTING section if
needed.
Note: When repowering the Booster
always un-plug and re-plug from a
Surge Protector Power Strip. NEVER
from the Booster.
______
Step 4:
Connect The System
Coax Cable
Coax Cable
Wall Mount Hole
Surge Protector
Power Strip
Power Cable
1
Connect the supplied
Coax Cable
and
Power Supply
on the side of the
Booster.