Wecan E-STUDIO205L Troubleshooting Manual - Www.Wecan-Eg.Com
32 Abo Haya El Tawhedy,
Aria 7, Nasr City,
CAIRO.
WWW.WECAN-EG.COM
T:+2(02)26711737
T:+2(02)22758997
M:+2(02)01111134509
Corrective Action
Problem Description
Message
Remove the paper from the exit tray of
the equipment
The exit tray of the equipment is full of
paper.
READY (INNER TRAY FULL)
Ask your administrator for details of
setting the limit for
the number of copies.
The number of originals to be
scanned has exceeded the limit
specified with the department code
during scanning.
Cannot copy
Check DEPARTMENT COUNTER
Set paper in the drawer or on the
bypass tray. The
touch panel indicates which drawer
(or the bypass
tray) has no paper.
To set paper, refer to the
Copying
Guide
.
No paper is left in a drawer or on the
bypass tray
Add paper
Contact your service representative
with the error
code displayed on the right side of the
touch panel.
! Warning
____________
Never attempt to repair, disassemble or
modify
the equipment by yourself.
You could cause a fire or get an
electric shock.
Always contact your service
representative for
maintenance or repair of the internal
parts of the
equipment.
The equipment requires adjusting by
a service technician
Call for service
Remove the jammed staples.
P.50 “Staple jam in the saddle
stitch unit”
Staple jam has occurred in the stapler
of the saddle stitch unit
Examine stapler in the Saddle Stitch
unit
Refill the staples.
P.59 “Refilling With Staples”
No staples are left in the stapler of the
saddle stitch unit.
Check staple cartridge in the Saddle
Stitch unit
Refill the staples.
P.59 “Refilling With Staples”
No staples are left in the stapler of the
finisher
Check staple cartridge
Remove the jammed staples.
P.43 “Clearing a Staple Jam”
Staple jam has occurred in the stapler
of the finisher
Examine Stapler
Press any of the [START], [COPY], [e-
FILING],
[SCAN], [PRINT], [FAX] and [ENERGY
SAVER]
buttons to clear the energy saving
mode.
The equipment has entered into the
energy saving mode since it has not
been used for a certain time.
Saving energy Press START button
Place the suitable size paper for the
original in the
drawer.
No paper suitable for the original is
set.
CHANGE DRAWER TO CORRECT
PAPER SIZE
Replace the original while aligning the
side guides of
the Reversing Automatic Document
Feeder to its
width so that it will be placed straight
The size of the original is not detected
correctly because the original is sent
from the Reversing Automatic
Document Feeder (optional) at a
skew.
Contact your service representative
for maintenance
The equipment requires inspection
and maintenance by a service
technician.
Time for periodic maintenance