Wechillit EF SERIES 1-TANK Manual - page 10
8. 1) Pour the old oil out of the pot when the temperature drops to
normal.
2) First switch off the power, fish plate out of the tank, and then
take the fryer head out of the back notch in the bottom box. Electric
heating tube and electric box are removed from the tank, and
should be put in a suitable, safe place. The oil tank can now be
cleaned.
9. In order to make sure the fryer remains safe and lasts for a long
time, the user should clean out the dregs of oil and dirt from the
element.
10.The fish plate in the oil tank is designed to protect the element.
Make sure to put the partition board into the tank when frying food.
11.1) There is temperature in electric box. The moving temperature is
230ºC; reset temperature is less 170ºC.
2) There is a reset button which must be pressed when the high
temperature limit cut out has been activated. This button is located
below the fryer head.
Press the reset button to restart.
12.There is a micro switch in the fryer head.
When the head is put
into the bottom unit of the fryer, the electricity is connected, and
when it is lifted out the electricity is disconnected.
13.Fresh vegetable oil should be used to avoid the risk of boiling over.
Do not use old oil because it will have a reduced flash-point and be