Wechillit EF SERIES 1-TANK Manual - For Check And Repair.
on.
5.
After
circuit
heating
electric heating tube is not
heated.
1.
Temperature
limiter
works.
1. Reset “over heating protecting
button” by hand.
6. Temperature control can
not be controlled.
1. Temperature limiter is
out of order.
1. Change temperature limiter.
Aforementioned troubles are just for reference. If any fault
occurs, please cease using, return it to professional technicians
for check and repair.
H. Transportation and storage
During transportation, the machine should be careful handled and
protected from shaking. The packaged machine should not be stored in the
open air. It should be stored in a ventilated warehouse without corrosive
gas. It should not be stored upside down. If it needs to be stored in open air
temporarily, protection against rain is needed.
I. Cleaning and maintenance
1. Disconnect the power supply before cleaning in case of accident.
2. Do not use a wet cloth with non-corrosive cleanser to clean the module
plate, the surface of the equipment and power cord. Direct washing by
water is not permitted in case of any damage to the equipment.
3. If the unit is not in use at any time, please switch off the temperature
controller and main switch.
4. Please store the equipment in a ventilated storehouse without corrosive
gas after cleaning when it is not to be used for a long time.