Weego JS18 Professional Owner's Manual - My Weego?
12
the clamps to ensure the most secure connection. Reconnect the Weego
and try again.
l
Your vehicle battery may not be the issue.
• In most instances a dead battery is preventing an engine start, but
sometimes it goes much deeper than that. There may be other functions
in your vehicle that aren’t working properly, thus preventing a successful
engine start. Please refer to your vehicle owner’s manual or visit your local
service garage to determine what the issue may be.
I accidentally connected my clamps to one another. have I damaged my Weego?
l
Remove the clamps from the Weego and press the power button. If the
indicator lights are still on, you have not damaged your Weego.
l
Connecting the clamps to one another creates a short circuit. You could have
blown the safety fuse on your black clamp. If so, you will need a new set of
clamps. To order a new set of clamps, please visit www.myweego.com/support.
I accidentally connected the clamps to the wrong terminals. have I damaged
my Weego?
l
Remove the clamps from the Weego and press the power button. If the
indicator lights are still on, you have not damaged your Weego.
l
You could have experienced a reverse polarity and blown the safety diode
on your red clamp. To order a new set of clamps, please visit www.myweego.
com/support.
I connected my portable device to my Weego with a uSB but it will not charge.
l
After connecting a device to your Weego be sure to power ON the Weego.
l
Make sure the Weego is charged. If no indicator lights illuminate after power-
ing on the device, charge your Weego.
l
If you are charging more than 2 devices on the 3-in-1 USB cable you need to
remove one of the devices as there is only enough current for two.
l
Make sure the USB cable is securely connected to the Weego.
l
You may have a faulty USB cable.
I connected my Weego to the charger but there are no indicator lights blinking.
l
Check that the charger is securely attached to the Weego input port.
l
You may have a faulty outlet. Try plugging your Weego charger into an
alternate outlet.
l
Make sure you are using the input port and not any of the output ports.
I am unable to turn on the flashlight.
l
Make sure your Weego is charged.