Weego JS18 Professional Owner's Manual - Operation Guide:
4
Operation Guide:
Indicator Lights
The JS12 Weego Jump
Starter has 5 indicator lights
to determine the amount
of power in the unit.
• Press the on/off switch to
activate the lights. The
display to the right shows
the level of power in
relation to the number of
lights illuminated.
• The indicator lights will
flash one by one when
the unit is charging. A
solid light indicates a complete level of charge. For example, when 2 lights
are illuminated and a third is blinking, that means the unit is between 40-60%
charged. Once the third light stops blinking the unit is 60% charged.
• When all the indicator lights are lit, the charging is complete and the unit will
automatically turn off.
Charging the JS12 Weego Jump Starter
Your Weego Jump Starter has two options for charging the unit:
1. With the wall plug
2. With the car adaptor in your vehicle
• Simply connect the wall plug or the car adaptor into the 14V/1A input port of
the Weego Jump Starter and start charging!
• The unit will fully charge in approximately 5 hours.
Charging
Charged
100%
20% 40% 60% 80%
When all five lights are lit
the unit is fully charged!