Weego JS18 Professional Owner's Manual - page 3
Learn about your Weego Jump Starter!
Jump Start Socket
5V/2A USB Output Port
LED Flashlight
Indicator Lights
On/Off Switch
12V/10A Output Port
19V/3.5A Output Port
14V/1A Input Port
Quick Start Guide – Ready, Get Set, Jump your vehicle!
1. Read vehicle owner’s manual: The vehicle manufacturer may have specific
cautions and instructions about jumping your vehicle of which you should
be aware.
2. If available, you should wear safety glasses and gloves while jumping
your vehicle.
3. If you are not in a well-ventilated area, please do not attempt to jump start
your vehicle.
4. Make sure your Weego has at least 2 indicator lights illuminated.
5. Remove any and all USB and/or charging devices connected to the Weego.
6. Put your vehicle in PARK and engage the emergency brake.
7. Make sure the vehicle battery terminals, jumper cables and Weego battery
pack are free of any moisture.
8. Turn off ALL electronics in your vehicle (air conditioner, heat, radio, lights,
chargers, etc.) to ensure optimal performance of your Weego.
9. Ensure key is in the “OFF” position in the ignition. For smart-key fobs (push-to-
start vehicles), make sure the vehicle is completely “OFF” before jump starting.
10. Check battery terminals for buildup. If buildup is present try to clean off
terminals with a wire brush or a dry cloth. A clean terminal will provide the
2