Weewell WHC 714 User Manual - Disposal
I
WHC714 User Manual
7
Mist coming out
from around nozzle
There are apertures between
the nozzle and water tank
Dip the nozzle in water for a
while and then fix it to the
socket on water tank
MAINTENANCE
In case when the water is hard which means water contains too much calcium and
magnesium, they can cause “white powder” problem and give heavy scum on the surface
of water basin, transducer and inner surface of the water tank. Scum on the surface of
transducer will make the unit work improperly.
We recommend:
1.Use cold boiled water or distilled water.
2.Clean the transducer, water tank and basin unit every week.
3.Change the water in water tank more often to keep it fresh.
4.Clean the whole unit, and make sure to keep all parts of the unit dry completely when
the unit is not in use.
How to clean the transducer:
1.Put 5-10 drops of vinegar on the surface of the transducer, wait for 2-5 minutes;
2.Brush out the scum on the surface.
3.Rinse the transducer with clean water.
How to clean the basin unit:
1.Clean the water basin with soft cloth and the vinegar if there is scum in it.
2.If the scum is covered on the security switch, drop the vinegar on the scum and clean it
out with the brush.
3.Rinse the water basin with clean water.
TECHNICAL DATA
Model No: WHC714
Standard Output: ≥250 ml/H
Water Tank Capacity: 3.0 Liters
Electric Supply: 220-240 V
Frequency: 50/60 Hz
Power: 30W
Ozone destiny: No
DISPOSAL
: Do not dispose this product as unsorted municipal waste, collection
of such waste separately for special treatment is necessary.