WEG CFW100 Installation And Operation Manual - page 9
Other manuals for CFW100:
User Manual, User Manual
of
24
Flash Memory Module
E
ng
lis
h
CFW100 | 9
NOTE!
When attempting to copy a protected
application (CFW100
→ CFW100-MMF), the
alarm A712 will occur and keep the SoftPLC
area clear (CFW100-MMF). If an attempt
to copy from the CFW100-MMF (without
SoftPLC application) to the CFW100 (with
SoftPLC application) occurs, the application
of the CFW100 will be erased.
For further information regarding the configurations to
copy the SoftPLC user program, refer to the CFW100
SoftPLC user manual.
NOTE!
The data transfer (CFW100-MMF
→ CFW100)
can only be done when the software versions
of the CFW100 inverters are compatible, that
is, when the digits x and y (Vx.yz) are the
same, and x ≥ 2.