Worcester DT10RF Instruction manual - page 19
Setting individual weekend days:
NOTE: If you do not require individual weekend
times, then press set? until the normal dis-
play is shown.
If you do not wish to change the setting for SAT,
then press set? until the normal display is shown.
1. Press OK to select the day displayed.
NOTE: Speed up the display by holding down
the + or - buttons.
2. Press + or - to change the ON time.
3. Press set? to set the ON time and select the
OFF time.
4. Press + or - to change the OFF time.
5. Press set? to set the OFF time and select the
next ON time.
Repeat operations 2 to 5 to set the second and third
ON/OFF times.
Press set? to change SUN or until the display
returns to normal mode.
DT10RF RECEIVER
PROGRAMMABLE SETTINGS
DT10RF PROG RAMMER
INSTRUCTION MANUAL
8 716 114 477a (08.07)
OPER AT ING & INSTA L L AT ION
INST RUCT IONS
15
Holiday settings
1. Press the set? button until SET and HDAY are
displayed.
2. Press OK, the display shows 00.
3. Press + or - to set the number of days you require
the system to be off.
4. Press set? then HDAY is shown in the display
and no demand for heating will be made from the
programmer. The programmer will return to normal
after the set number of days.
To cancel the Holiday setting and return to normal
operation, press any button.
NOTE: The programmer counts each pass through
midnight as a day.
For example, if you did not want heating
from Saturday morning until Tuesday
morning, set for three days.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818