X-Loupe A500 Assay series User Manual - page 7
- 10 -
- 11 -
2 Camera Setup before using/while using for Micro Photography
All the settings of camera collocated with the X-Loupe® have been altered to
meet the micro-photography prior to its shipping. Afterward, if there’s any setting
changed, please refer to the following setting list.
(1) Adjust the zoom to its maximum optical value for micro-photography.
(2) Manual Mode is required for micro-photography. Do Not use Macro / Infinity
Shot Mode.
(3) Set the Exposure Compensation to zero.
(4) Set the White Balance to Day Light Mode while using the Light Source of
X-Loupe®.
(5) Set the Tone of an Image to Vivid.
(6) Set the Metering System to Evaluative.
(7) Turn OFF the flash for micro-photography.
Notice and Preparation for Micro-Photography
1 X-Loupe® Basic Setup before using
When the X-Loupe® is assembled, please do the following procedures to enjoy
using the X-Loupe®
(1) Loaded and ready the battery and memory card into the camera.
(2) Select the lens as desired and assemble it onto the X-Loupe® module.
(3) Turn on X-Loupe® and camera. The lens of camera should stretch out, and
there will be image circle observed on the LCD monitor (Shown at left ), and it’s
normal. Then you have to adjust the camera to its maximum optical value, (refer
to next page "Camara Setup before using", to start digital zoom), and this will be
the standard optical zoom value for operating X-Loupe®.
(4) Remember to turn OFF the camera flash whenever you are using X-Loupe® .
4.0X
How to choose a proper magnification lens?
◎
Field of View: The larger magnification, the smaller field of view,
and vice versa.
◎
Depth of Focus: The larger magnification, the smaller depth of focus,
and vice versa
◎
Moving Speed of the object: The faster object is moving, and the
objective lens with smaller magnification should be used in order to
obtain clear pictures. It is useful while taking picture for a living thing
such as insects and the earthworm.