X10 VT38A Owner's Manual - page 2
3
33
33
2
22
22
F
RONT
, B
OTTOM
, & S
IDE
V
IEWS
F
RONT
V
IEW
Bulbs not
included
B
OTTOM
V
IEW
(
WITH
LID
CLOSED
)
S
IDE
V
IEW
Camera
Motion Sensor
Controls under this
weatherproof lid.
Remove clear cap if you need to refocus the
camera. Replace to keep rain out.
I
NTRODUCTION
Your Wireless Motion Activated Camera with Dual Floodlights consists of a
Color Video Camera with built-in 2.4 GHz transmitter. It is activated by its
built-in Motion Sensor so that when someone approaches your home, the
camera turns on. At night the connected floodlights also turn on with motion
to light up the area that the camera sees (bulbs not included). The camera
transmits its picture via its built-in 2.4 GHz transmitter, to a Video Receiver
(sold separately) which you connect to a TV anywhere in your home. The
Camera sends the wireless signals (even through walls, up to 100 ft.). The
Video Receiver converts the signals back to video signals and feeds them
through a cable to your TV's Video input.
You can purchase additional Motion Activated Cameras (up to 4) so you
can have a multiple camera system. You can then set all cameras to the
same channel as the receiver and turn the cameras on and off with X10
remote controls (sold separately) so as to only have one camera turned on
at a time, and displayed on your TV.