X4-TECH IR-1200 Instruction Manual - Connecting To A Network
20
21
› You will need a network connection for „Internet radio“ or „Music player“ operation modes.
› You will need either a router and RJ45 cable or a WLAN router together with the required pass-
word to establish a connection to your network.
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates.
› When you select and „Internet radio“ or „Music player“ mode, your device will try to connect to
a network. If this is the fi rst time that a connection has been made or stored networks are not
accessible, then the „Internet Wizard“ will start. To start the „Internet Wizard“ manually, select the
following:
MENU › System settings › Network › Internet Wizard
Once started you can enter the following information:
› WLAN region (select a country/select a region from the list)
› Network name (select the desired network)
› An encrypted wireless network will require a password.
› Use the navigation buttons or the „CONTROL” dial to move the cursor through the displayed
characters. Press either the „ENTER” button or the „CONTROL” dial to confi rm the selected cha-
racter.
› Select „BKSP“ to delete the last character selected.
› Select „CANCEL“ to cancel your input.
› Select „OK“ to confi rm the entered code and to try to establish a connection to the selected
network.
› The IR-1200 will return to the password entry window, if no connection could be made.
› You will not be able to delete desired networks under the following menu options:
› System settings › Network › Network Profi le
Chapter 7
Internet radio
Chapter 6
Connecting to a network
› Press the „MODE“ button repeatedly or select „Internet radio“ in the main menu for radio ope-
ration.
› The IR-1200 has access to thousands of stations and podcasts from around the whole world. If
you select the internet radio mode, then the IR-1200 will contact the Frontier Silicon Internet ra-
dio portal to access a list of stations that are organized into diff erent categories, such as Country
or Genre. Once a station has been selected, the device will establish a connection to this station
and begin broadcasting. This internet portal also allows you to create several lists of your favorite
stations. In order to be able to use this extra feature, you will have to register your IR-1200 on the
internet portal website.
Connecting to a network
› You can use the options MENU › System settings › Network › Internet Wizard to view a list of ac-
cessible networks. Use the „“ and „“ buttons or turn the „CONTROL“ dial to select the desired
network. Once the „ENTER” button or the „CONTROL” dial has been pressed, the device will try to
establish a connection to the selected network.
› [Network name] › Selects this network.
› [Rescan] › Repeats a search for available networks.
› [Wired] › Selects the network connected via cable.
› [Manual confi g] › Starts the option for manual entry of network information:
1. Select the preferred connection type:
› Wired (via cable) or Wireless (via wireless network)
2. Select if the Direct Host Confi guration Protocol (DHCP) is to be used:
DHCP enable › Activates use and switches to the automatic reception of network data.
DHCP disable › Deactivates use and carries on with the manual entry of network data.
3. IP settings
Set the IP address and the Subnet mask with „“ and „“ or with the „CONTROL“ dial. Use the
„“ and „“ buttons to switch between fi elds. Press „ENTER“ to switch to the next fi eld.
6
Connecting to a network
7