Xact X33X Instruction Manual - page 13
OPERATION
Changing Channels:
The X33X COMMUNICATOR has 22 channels for communicating with others.
To change the COMMUNICATOR's channels while in COMMUNICATOR mode:
1. Enter COMMUNICATOR mode by pressing the MENU button for 3 seconds and a short
"beep" followed by a long "beep" will be heard, the COMMUNICATOR's LCD Screen
will quickly display all of the COMMUNICATOR's status icons, and the
COMMUNICATOR will enter COMMUNICATOR mode and display the current channel.
2. Press the MENU button momentarily (for no longer than 1 second) to enter the MENU
mode. You will hear a "beep" and the channel number will "flash" on the LCD Screen.
3. Press the UP
or DOWN button repeatedly (or hold the button to scroll) to increase
or decrease the channel number on the COMMUNICATOR's LCD Screen, and a short
"beep" will be heard with each channel change.
4. Press the MENU button again to enter the CTCSS Code mode (refer to the "CTCSS Code"
section below for more information) or press the PTT/CALL button to exit to STANDBY
mode.
5. Press the MENU button again to enter the VOX mode (refer to the "VOX" section for more
information) or press the PTT/CALL button to exit to STANDBY mode.
6. Press the MENU button again to enter the ROGER BEEP mode (refer to the "ROGER
BEEP" section for more information) or press the PTT/CALL button to exit to STANDBY
mode.
7. Press the PTT/CALL button to exit the MENU mode at any time, or the unit will
automatically return to STANDBY mode if no buttons have been pressed for 10 seconds.
Changing CTCSS Code:
The X33X COMMUNICATOR has 38 CTCSS Codes available. The selected
CTCSS Code may be different for each channel. To change the CTCSS Code
while in COMMUNICATOR mode:
1. Press the MENU button twice and the CTCSS Code icon will flash.
2. Press the UP
or DOWN button repeatedly (or hold the button to scroll) to increase
or decrease the CTCSS Code number on the COMMUNICATOR's LCD Screen, and a
short "beep" will be heard with each code change.
3. Press the PTT/CALL button to exit the MENU mode at any time, or the unit will
automatically return to STANDBY mode if no buttons have been pressed for 10 seconds.
12
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM Page 13