Xact X33X Instruction Manual - page 16
OPERATION
For greater privacy and convenience of hands-free transmission, use an Ear
Bud (headset) with Microphone (see Accessory Order Form) when using VOX
mode.
Connecting the Ear Bud (Headset):
1. Set the COMMUNICATOR to VOX mode.
2. Lift the HEADSET/CHARGER JACK COVER located on the side of the
COMMUNICATOR.
3. Insert the plug end of the Ear Bud into the HEADSET/CHARGER JACK. Place the Ear
Bud earpieces over and in the ear, and then adjust the location of the MICROPHONE.
Roger Beep Tone Feature:
The COMMUNICATOR is equipped with an adjustable ROGER BEEP TONE
feature, which enables the user to send a Beep Tone after every press of the PTT
Button. This will prompt any receiving unit that the transmission has ended.
1. Press the MENU button four times and the “rb” icon will appear on the LCD Screen.
2. Press the UP
or DOWN button to turn the ROGER BEEP feature ON or OFF. .
3. Press the PTT/CALL button to return to RECEIVE/STANDBY mode.
Auto Squelch Feature:
The COMMUNICATOR has an automatic squelch system that automatically eliminates weak
transmissions and unwanted noise due to terrain conditions and range limitations.
Automatic Power Save Feature:
The COMMUNICATOR has a unique circuit that extends battery life. If the
COMMUNICATOR does not detect a transmission within 5 seconds, it automatically
switches to POWER SAVE mode. The COMMUNICATOR can still receive transmissions in
this mode.
Backlit LCD Screen:
The COMMUNICATOR's LCD Screen will automatically light up for 5 seconds with the
press of any button.
15
X33X Owner’s Manual (Rev3).qxd 7/16/2003 9:57 AM Page 16