Xantrex XPower 3000 Owner's Manual - Owner’S
v
Important Safety Instructions
IMPORTANT: Read and save this
Owner’s
Guide
for
future reference.
This chapter contains important safety instructions for the
XPower
Inverter 3000
.
1. Before using the
XPower Inverter 3000
, READ ALL instructions and
cautionary markings on or provided with the
XPower Inverter 3000
,
the batteries, and all appropriate sections of this guide.
2. DO NOT OPERATE this product unless it has been installed by a
qualified installer in accordance with the
XPower Inverter 3000
Installation Guide.
3. Do not expose the
XPower Inverter 3000
to rain, snow, spray, or bilge
water. This product is not intended for marine applications.
4. To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Overheating may result.
5. To avoid a risk of fire and electric shock, make sure that wiring is in
good condition, adequately rated, and not undersized. Do not operate
the
XPower Inverter 3000
with damaged or substandard wiring.
6. Do not operate the
XPower Inverter 3000
if it has received a sharp
blow, been dropped, or otherwise damaged in any way. If the
XPower
Inverter 3000
is damaged, see the Warranty section.
7. Do not disassemble the
XPower Inverter 3000
. It contains no user-
serviceable parts. See Warranty for instructions on obtaining service.
Attempting to service the
XPower Inverter 3000
yourself may result
in a risk of electrical shock or fire. Internal capacitors remain charged
after all power is disconnected.
8. To reduce the risk of electrical shock, disconnect DC power from the
XPower Inverter 3000
before attempting any maintenance or cleaning
or working on any circuits connected to the
XPower Inverter 3000
.
Turning off controls will not reduce this risk.
WARNING: Shock, fire, and heat hazard. Risk of