Xenarc 706TSA Installation Manual

Manual is about: 706 SERIES

Summary of 706TSA

  • Page 1

    706 series installation manual m.

  • Page 3

    Features · for in-car computing, pc, server, gps various vga use · 5-wire resistive touch screen (usb) · multi-monitor touchscreen support · vga · dvi-d input input (15 pin d-sub) x 1 · video input x 2 · audio input / built-in speaker · ntsc / pal multi-system · 16x9 aspect ratio · high resolution d...

  • Page 4

    Specification

  • Page 5

    Optional mounting stand step1. Slide monitor into optional mounting stand step2. Secure “height” position by adjusting knob step3. Secure “tilt” position by adjusting knob create power source insert power adapter as shown create vga source step1. Attach the 20-pin connector to the back of the monito...

  • Page 6

    Quick-start

  • Page 8

    Remote control 1. Power button: on / off 2. Mirror button: set the display mode by pressing the image mirror or not. You can use " up / down / right / left button to mirror selection. Default is off. 3. Dimmer button: set the dimmer mode by pressing the image light and shade. 4. Mute button: the wil...

  • Page 13

    Software installation

  • Page 14

    Step4. Select the rotating monitor utility and/or the shutdown utility if you want to install them and click on next to continue. The rotating monitor utility allows you to rotate your display while the shutdown utility provides you with one-click shutdown. Step5. Click next to accept the destinatio...

  • Page 15

    Step6. Click next to accept the program folder default, shown below. Files will then start to be copied to your computer. Step7. When the warning that says this software has not passed windows logo test, please click on continue anyway to continue the installation. File will continue to be copied to...

  • Page 17

    Step11. Click on next to continue. Step12. Click finish to finish setup. Your touchscreen is ready to use now. You can click on the icon touchkit located on your desktop to launch the touchscreen program for various settings and adjustments. Software installation

  • Page 18

    Note note 1: if you are trying to connect the monitor to a laptop computer, please make sure to enable the 15-pin d-sub external monitor output located at the back of your laptop computer. Some laptop computers have three modes: laptop display only, laptop display plus external monitor, and external...

  • Page 19

    Owner’s records the model and serial numbers are located on the rear of the unit. Please record these numbers in the spaces provided below, as well as the dealer name, address, and telephone number. Please refer to these records whenever speaking to your dealer regarding this product. Owner’s record...