Xenarc 706TSA Installation Manual - page 7
7
|
Hardware Installation
1. AV input x 2
2. DVI-D input x 1
3. VGA+AUDIO input x 1
4. DVI and VGA share a sound passway
5. PC/AV PIP/POP function
6. Automatic sensitization function
7. Remote control
8. Electric mode in the province: It will be turn off TFT LCD power and poor light
when no signal in 3 minutes.
9. Supply: 12V / 3A Max operating current:2A
Please make sure that signal line and monitor are connected and fixed.
Then insert the electricity to start the machine. Press the POWER can be open
and close.
Function
Hot Keys description:
Sensor light description:
Source menu input description:
1.Power key: ON/OFF
2.Select key: This button lets you select the internal signal. Press left ( ) or
right ( ) key to move cursor choice input source then press MENU key to enter.
3.MENU key: Stands for Menu. This button is show OSD menu and press up /
down key to move cursor. Then press menu key leave again.
Press select key to move cursor and press up / down select menu argument or
function.
4. Down key: This button can decrease volume directly.
5. Up key: This button can increase volume directly.
Auto sensor can set poor light in the menu of TFT LCD.
1. VGA: Use the computer input source only.
2. COMPOSITE AV1 : CVBS / AUDIO 1 input
3. COMPOSITE AV2 : CVBS / AUDIO 2 input
4. DIGITAL: The computer source ( DVI-D ) input.
5. SHOW SRC: To measuring input source when ALL / ACTIVE is selected.
In ALL mode will light. In ACTIVE mode will cover no to connect signal chose.