XENO XDR4 range Installation And User Manual - page 54
53 | Chapter 1 : DVR User Manual
In the case that
the Type is set to “C+M” (Continuous + Motion), “C+S” (Continuous + Sensor), or “C+M+S” (Continuous +
Motion + Sensor), both Continuous and Event Record settings are simultaneously engaged.
If there is no event (Motion, Sensor, Alarm), the DVR records continuously with the Continuous Record settings. If there is an
event (Motion, Sensor, Alarm), the DVR records with the Event Record Settings.
If you want to disable a specific camera from recording, select the “NONE” option for the Type.
Select the record resolution for each camera channel.
Users can select the record resolution for each camera channel. The record resolution is applied to both Continuous and
Event (Sensor, Alarm, Motion) record settings.