XENO XDR4 range Installation And User Manual - page 56
55 | Chapter 1 : DVR User Manual
the user wants to copy from the
“FROM” field. Choose the parameters, such as ON/OFF, RESOLUTION,
IPS, QUALITY, and AUDIO on the checkbox. Check on the checkbox with the camera numbers to apply
the copy setting
(s) to another channel on the “To” box.
N
OTE
The storage capacity for the same image will be different. Image per byte is ratio to the image dimensions
(horizontal x vertical), thus 720×240/288(2CIF) is twice the size of 352×240/288(CIF), and
720×480/576(D1) takes about 4 times the storage capacity. Therefore, when high resolution is selected
for the same period, the storage capacity taken up will be larger, and the storage period will be shorter on
the same Hard disk capacity.
N
OTE
For the same resolution, frame per byte size will vary according to various reasons such as the recorded
picture quality setting, movement, complexity of the image, and noise. Therefore, the total recording
period will differ hugely according to the specific image conditions.
352×240/288 : Standard Quality Standard 1~5KB
720×240/288 : Standard Quality Standard 5~10KB
720×480/576 : Standard Quality Standard 10~20KB
“Quality” by 40(low), 60(standard), 80(high), and 100(highest) makes frame size different by around 30%
in each level.