Xerox 460 DC/ST User Manual - page 46

Page 32

Xerox Document Centre User Guide

Loading paper

Loading Paper in Trays 1 - 4

1. Pull out the paper tray.

2. Load the paper neatly in the tray. Do not load paper 

above the maximum fill line mark on the edge guide.

3. Ensure that the edge guides are against the top, 

bottom, and side edges of the paper. 

4. Push in the paper tray. 

A pop-up screen may appear on the screen asking you 

to confirm the paper stock settings or to load the 

required paper for the tray. Confirm or change the 

paper and size descriptions as required.

Loading paper in Tray 5, the Bypass Tray

Use Tray 5 to load special or odd-size stock. Insert paper 

as shown. Do not load paper above the maximum fill 

line. Pull out the extension bar to accommodate paper 

that is longer than the tray. Confirm or change the paper 

and size descriptions as required.

Loading Paper in Tray 6, the High Capacity Feeder

To load paper, open the cover and wait for the tray to 

lower. When the paper has been loaded, close the cover 

to raise the tray. Tray 6 can only handle 8.5 x 11 inch or 

A4 size paper.

NOTE

Use the labels for instruction on how to orient special 

stock such as transparencies, labels, or hole-punched 

stock.

0

5

6

800086C-LKS

Extension 

bar

Insert the paper 

for Tray 5 

Insert paper for Tray 6.