Xerox 460 DC/ST User Manual - page 60

Page 46

Xerox Document Centre User Guide

Using Reduction/Enlargement

Typical Application

Use the automatic Reduction/Enlargement features to 

adjust the size of the output image.

Procedure

1. Load your originals.

2. Make your programming selections by touching the 

screen. The most common selections are on the Basic 

Copying Tab (Output, 2-sided Copy, Reduction/

Enlargement, and Paper Supply).

3. Use the keypad to enter the number of copy sets.

4. In the Basic Copying Tab under Reduce/Enlarge, 

select an existing preset or press the More...button. 

Select from the additional presets or enter your 

desired Reduction/Enlargement percentage and press 

the Save button.

5. Press the Start (

) button.

HINT

Custom Auto% will fill the copy page by stretching the 

image to the edges of the copy page. 

Normal Auto% will proportionally enlarge the image 

until it fills the copy page. 

TIP

When using the Document Glass, you can enlarge an 

image up to 400%. Using the Document Feeder you can 

enlarge up to 200%.