Xerox 8254E User Manual - page 45
Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
3-7
2. Press the [Power] key to turn the printer OFF.
–
The Power lamp on the control panel turns OFF.
–
The printer starts the procedure to turn the power OFF.
–
"Power Off" displays in the control panel.
–
All of the lamps on the control panel and the LCD monitor are turned OFF.
–
The printer automatically turns the power OFF.
Notes:
•
If the control panel is in the following status, the power is ON.
–
The [Power] key is pressed in.
–
The green Power lamp is lit.
•
Press the [Power] key once again to turn the power OFF.
•
If the head height is set to High, “Change Head Gap Low” will be displayed in the control
panel and the procedure to turn the power OFF stops.
•
To restart the procedure, return the head height to "Low."
When returning the print head
to the original position
•
If there is a problem during the turning OFF operation, a message displays in the control
panel and the printer may stop operating. If the printer does stop operating, refer to
Troubleshooting
and deal with the problem.
•
After turning the printer OFF, wait for ten seconds or longer to turn it ON again.