Xerox D110 User Manual - page 292
Other manuals for D110:
System Administration Manual, User Manual, Detailed Specifications, Specifications, Specification, Supplementary Manual, User Manual, User Manual, Manual
of
310
2. Open the right cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Check the inside of the finisher for any remaining staples, and if necessary, remove
them.
5. Open the staple cartridge unit as shown and remove the jammed staple.
Warning
To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.
User Guide
18-36
Standard Finisher Plus