Xerox DocuColor 5000AP User Manual - page 59
DocuColor 5000AP User Guide
4-5
4. Accessories
High Capacity Stacker
The High Capacity Stacker (HCS) is an optional finishing device
that provides stacking and offsetting capabilities for output to the
HCS Stacker Tray. The HCS connects to the right side of the
digital press and replaces the Offset Catch Tray.
The HCS Stacker Tray has a capacity of 3500 sheets of 24 lb (90
g/m
2
) centerline paper (or 370 mm high). The HCS Top Tray has a
capacity of 250 sheets of 24 lb 90 gm
2
centerline paper. The HCS
is supplied with two Stacker Carts. If needed, you can purchase an
additional Stacker Cart. Contact your Xerox representative for
further details.
NOTE: The Stacker Tray cannot support more than 99 lb. (45 kg)
of printed material and therefore, cannot hold 3500 sheets of
coated paper (for example SRA3).
With the HCS you can:
•
Select Offset Mode when collated sets are sent to the Stacker
Tray.
•
Send documents to the top tray.
•
Send sets of different sizes to either the Stacker Tray or the
top tray.
NOTE: To avoid jams, do not stack larger sets on top of
smaller sets, or stack paper on top of transparencies.
•
Send a sample set to the top tray.
•
Chain two High Capacity Stackers to the digital press and
send collated sets to HCS 1, HCS 2 or both High Capacity
Stackers.
•
Send collated sets through the stacker to another connected
finishing device.