Xerox DocuColor 5000AP User Manual - page 86
DocuColor 5000AP User Guide
4-32
4. Accessories
NOTE: To undock the stacker/stapler from the digital press, reach
into the circular area near the bottom of the stacker/stapler for the
Undocking Lever. Refer to the picture below.
Pull the lever toward you and hold it in position while moving the
stacker/stapler a small distance (25.4mm, 1in.) away from the
press. Release the lever and continue to move the stacker/stapler
as far as required.
Poor Stacking:
Mixed sizes of paper
Run separate jobs and empty stacker.
High paper curl
•
Adjust digital press Decurler. See,
“Decurler
Profile” on page 2-5
for additional information.
•
Flip paper in digital press paper tray(s).
•
Rotate paper in the digital press paper tray(s).
Mechanical obstruction
•
Check for obstruction in the stacker stapler paper
path.
•
Ensure that all transports and baffles are properly
seated.
Paper Jams:
Use Top Tray
Deselect offset or restart job to the Top Tray.
High paper curl
•
Adjust digital press Decurler. See,
“Decurler
Profile” on page 2-5
for additional information.
•
Flip paper in digital press paper tray(s).
•
Rotate paper in the digital press paper tray(s).
•
Switch to heavier paper.
Problem
Cause
Solution
Location of Undocking Lever