Xerox DocuColor 8000 Reference Manual - page 14
W
ELCOME
14
T
O
R
ESTART
THE
F
IERY
EXP8000
1 Make sure that the Fiery EXP8000 is not receiving, processing, or printing any files.
Wait until no processing or printing jobs appear in the Command WorkStation Active Jobs
window, or FieryBar indicates Idle in the RIPping and Printing areas.
2 Shut down and turn off the digital press.
For instructions, see your digital press documentation.
3 Close all open applications except FieryBar.
4 Right-click FieryBar and choose Restart Fiery from the menu that appears.
A confirmation message appears.
5 Click OK.
Wait for the Fiery EXP8000 server software to shut down and restart. You may have to wait
one minute or more. FieryBar displays an Exited status while the server is restarting.
6 Turn on the digital press.
For instructions, see the documentation that accompanies your digital press.