Xerox DocuColor 8000 Supplementary Manual - page 24
P
RINTING
VARIABLE
DATA
DOCUMENTS
24
Imposing variable data jobs
If variable data Imposition is enabled on the Fiery EXP8000/50, you can impose FreeForm
and FreeForm 2 jobs, as well as jobs using other supported variable data languages.
You can impose a variable data job using Hot Folders. For more information, see Hot
Folders Help.
When you submit a variable data job to Command Workstation, open Impose to impose the
job. The printed job merges and imposes the variable and master file.
When you impose a variable data job, you can choose a single record imposition scheme or
a multiple records imposition scheme. For more information, see Command WorkStation
Help.
Imposing FreeForm jobs with Impose
You can select Imposition settings for a FreeForm variable data job. Imposition must be
enabled on the Fiery EXP8000/50.
T
O
IMPOSE
A
F
REE
F
ORM
JOB
1 Download any PS or PDF file as a master job to the Fiery EXP8000/50.
2 Open Command WorkStation, right-click the master job, and then click Properties.
3 Click the VDP icon, select the Create Master print option, and assign the master job a
number (1-15).
4 Send the master job to Print or to Process and Hold.
5 Download the variable data file to the Fiery EXP8000/50.
6 In Command WorkStation, right-click the variable data file and click Properties.
7 Click the VDP icon, select the Use Master print option and select the master job number.
8 Right-click the variable data file and click Impose.
Select Imposition settings for the variable data job.
For more information about Imposition settings, see Command WorkStation Help.
9 Process the variable job.