Xerox DocuColor 8000AP Supplementary Manual - page 25
C
OLOR
W
ISE
P
RO
T
OOLS
25
Installing Device Link Profiles
If you are an administrator, you can download Device Link Profiles to the Fiery EX8000AP
using Profile Manager. You must associate a Device Link Profile with the following settings:
• An RGB Source Profile or a CMYK Simulation Profile setting and
• An Output Profile setting
The Device Link Profile is enabled when these two settings are selected.
You can enable a Device Link Profile in three locations:
• In ColorWise Pro Tools Color Setup, select the default settings for RGB Source Profile,
CMYK Simulation Profile, and Output Profile. These settings apply to all jobs unless
overridden for a particular job.
• Use Expert Color Settings in the Fiery EX8000AP printer drivers to select the settings for
RGB Source Profile, CMYK Simulation Profile, and Output Profile when you print a job.
• Use Command WorkStation Job Properties to override the settings for RGB Source
Profile, CMYK Simulation Profile, and Output Profile for a specific job.
For more information about enabling Device Link Profiles using Color Setup, see
.
For more information about enabling Device Link Profiles using Expert Color Settings in the
Fiery EX8000AP printer driver, see
.
T
O
DOWNLOAD
D
EVICE
L
INK
P
ROFILES
USING
P
ROFILE
M
ANAGER
1 In Profile Manager, if you do not see the Device Link Profile in the Description list, select the
folder that contains the Device Link Profile by clicking Browse in the upper-left corner.
2 Click OK to add the folder contents to the Description list.
The Device Link Profile is added to the Description list.