Xerox DocuColor 8000AP Supplementary Manual - page 30
C
OLOR
W
ISE
P
RO
T
OOLS
30
For information about the Control Bar, configurable Auto Trapping, Progressives, and
Halftone Simulation features in Color Setup, see
.
Using Color Setup to enable Device Link Profiles
You can enable Device Link Profiles using Color Setup.
For information about installing and assigning Device Link Profiles, see
.
T
O
USE
C
OLOR
W
ISE
C
OLOR
S
ETUP
TO
ENABLE
D
EVICE
L
INK
P
ROFILES
1 Open Color Setup from ColorWise Pro Tools.
2 Select the RGB Source profile or the CMYK Simulation Profile and the Output Profile.
When you select a source and output combination that is defined as a Device Link Profile, the
Device Link Profile is automatically activated.
When the Device Link Profile is selected, the Color Process workflow updates and some of the
Fiery print options may not appear.
You will see the message “Device Link Profile in use” under the RGB Source Profile or CMYK
Simulation Profile.
3 Click OK to exit Color Setup.
1
Device Link Profile in use
1