1. DL manuals
  2. Xerox
  3. Printer
  4. DocuPrint C3055
  5. Settings Manual

Xerox DocuPrint C3055 Settings Manual

Manual is about: Xerox Printers User Guide

Summary of DocuPrint C3055

  • Page 1

    Docuprint c3055/c3055 dx esc/p emulation setting guide.

  • Page 2

    Adobe, the adobe logo, acrobat, acrobat reader, and postscript are either registered trademarks or trademarks of adobe systems incorporated in the united states and/or other countries. Netware is a registered trademark of novell, inc in the united states and other countries. All product /brand names...

  • Page 3: Preface

    Preface 3 preface thank you for purchasing the docuprint c3055/c3055 dx. This guide provides information about the esc/p emulation of the printer. To get the most out of this printer and to use it effectively, please read this guide as necessary. This guide assumes you are familiar with the basic op...

  • Page 4: Contents

    4 contents contents preface.............................................................................................................. 3 types of manuals.............................................................................................. 5 using this guide .................................

  • Page 5: Types Of Manuals

    Types of manuals 5 types of manuals note • to view pdf files, you must have adobe ® acrobat ® reader ® or adobe ® reader ® installed on your computer. If you do not have it installed, install it from the cd-rom of the driver cd kit. Setup guide provides step-by-step instructions on how to set up you...

  • Page 6: Using This Guide

    6 using this guide using this guide organization this guide is organized into the following chapters. The summary of each chapter is as follows: 1. Using emulation describes the fonts and interfaces supported and the printer emulated in the esc/p emulation mode. 2. Setting the esc/p mode describes h...

  • Page 7: Using Emulation

    1.1 about emulation 7 1 using emulation 1.1 about emulation this chapter explains the esc/p emulation of the printer. Print data is data written based on certain rules (grammars). These rules (grammars) are called "print languages". The printer supports two types of print languages: page description...

  • Page 8

    8 1 using emulation switching print languages the printer supports multiple emulation modes and can switch between multiple print languages. There are three methods of switching print languages. Switching languages by commands if the printer receives a command that explicitly tells which language to...

  • Page 9: 1.2

    1.2 about fonts 9 1.2 about fonts this section explains the fonts that can be used in the esc/p emulation mode. Supported fonts the following outline fonts can be used in the esc/p emulation mode. Note • the supported fonts and their print samples can be viewed on the [font list]. For information ab...

  • Page 10: 1.3

    10 1 using emulation 1.3 paper eject function this section explains the paper eject function of the printer. Forcibly ejecting the remaining data in the esc/p emulation mode, the printer does not eject a job unless it receives a full page worth of data. When the host interface is parallel or usb, an...

  • Page 11: 1.4

    1.4 print features in the esc/p mode 11 1.4 print features in the esc/p mode the following print features can be used in the esc/p emulation mode. Multiple up (esc/p) multiple up is a feature that prints multiple pages onto one sheet of paper. In the esc/p emulation mode, you can perform 2-up printi...

  • Page 12: Setting The Esc/p Mode

    12 2 setting the esc/p mode 2 setting the esc/p mode 2.1 control panel menus there are two types of control panel menus: the mode menus and common menus. The mode menus are the menus that relate to the emulation modes. The common menus are the menus for all the other features of the printer. Note • ...

  • Page 13

    2.1 control panel menus 13 delete form to display this item, select [admin menu] > [init/del data] > [delete form]. This item allows you to delete esc/p forms registered in the printer. If there is no form registered in the printer, [not registered] appears instead of [delete form]. • delete escp fo...

  • Page 14: 2.2

    14 2 setting the esc/p mode 2.2 setting the esc/p mode menu this section explains the items in the esc/p mode menu and how to configure them. Esc/p mode menu items the items that can be set in the esc/p mode menu are as follows: features menu paper tray sets the paper tray to be used when printing. ...

  • Page 15

    2.2 setting the esc/p mode menu 15 document size sets the size and orientation of the document to be printed. The following options are available: [portrait] (default) [landscape] [a4 portrait], [a4 landscape], [a3 portrait], [a3 landscape], [a5 portrait], [a5 landscape], [b4 portrait] [b4 landscape...

  • Page 16

    16 2 setting the esc/p mode whole output size automatically calculates the zoom ratio based on [document size] and [output size] and prints the document so that the physical size of [document size] fits into the printable area of [output size]. Note • when continuous-form paper is selected for [docu...

  • Page 17

    2.2 setting the esc/p mode menu 17 alphanumeric sets the font for single-byte characters (ank) to [roman] (default) or [sans serif]. Note • this setting is not affected by extension commands sent from users. Refer to • "1.2 about fonts" (p. 9) page position sets the paper position by enabling or dis...

  • Page 18

    18 2 setting the esc/p mode [off] does not skip blank pages. Note • pages that only contain white images or spaces entered with external characters will be printed as blank pages even when this is set to [on]. • when [on] is selected, and if [2 sided print] or [2 pages up] is enabled, blank pages wi...

  • Page 19

    2.2 setting the esc/p mode menu 19 [off] (default) prints single-byte characters without reducing their sizes. [on] prints single-byte characters in reduced sizes. Char. Code table if the chinese font kit is installed, select the type of character code table for single-byte characters. The options a...

  • Page 20

    20 2 setting the esc/p mode extension sets the extension (first 2 bytes) of an extended command if you want to enable printing by text codes. The codes between 0x21 and 0x7d are valid. The default is [&%]. Note • an extended command is prefixed with an extender followed by command identification dat...

  • Page 21

    2.2 setting the esc/p mode menu 21 settings the esc/p mode menu the following example shows how to set the document size of the esc/p mode to [a3 portrait]. Ready to print 1. Press the menu print language 2. Press the button. Print language esc/p 3. Press the button. Esc/p features menu 4. Press the...

  • Page 22: 2.3

    22 2 setting the esc/p mode 2.3 esc/p mode reports/lists this section explains the reports/lists that relate to the esc/p emulation mode. Note • for information about other reports/lists that can be printed from the printer, refer to the ‘user guide’. Printer settings lists the settings configured o...

  • Page 23: 3.1

    3.1 zoom ratio table 23 3 esc/p mode reference materials 3.1 zoom ratio table note • some of the following output sizes may not be available depending on the model of your printer. Zoom ratios - fixed document size output size a3 a4 a5 b4 b5 11x17 8.5x14 8.5x13 8.5x11 postcard a3 long edge 100 70 49...

  • Page 24

    24 3 esc/p mode reference materials unit: % note • when the zoom ratio of either the long edge or short edge is not within 45 - 210%, the zoom ratio of both the long edge and short edge will be 100%. Zoom ratios - fixed (when 2 pages up is enabled) postcard long edge 100 100 145 100 178 100 100 100 ...

  • Page 25

    3.1 zoom ratio table 25 unit: % note • when the zoom ratio of either the long edge or short edge is not within 45 - 210%, the zoom ratio of both the long edge and short edge will be 100%. B5 long edge 116 81 56 100 70 109 83 83 83 100 short edge 116 80 55 100 69 120 98 90 76 100 11 x 17 long edge 68...

  • Page 26

    26 3 esc/p mode reference materials zoom ratios - whole output size document size output size a3 a4 a5 b4 b5 11x17 8.5x14 8.5x13 8.5x11 postcard a3 long edge 98 69 48 85 59 101 83 77 64 100 short edge 97 68 47 84 58 91 70 70 70 100 a4 long edge 138 97 68 120 84 142 117 108 91 100 short edge 137 96 6...

  • Page 27

    3.1 zoom ratio table 27 unit: % note • when the zoom ratio of either the long edge or short edge is not within 45 - 210%, the zoom ratio of both the long edge and short edge will be 100%. Zoom ratios - whole output size (when 2 pages up is enabled) 15 x 12 long edge 135 95 66 117 81 139 105 114 89 4...

  • Page 28

    28 3 esc/p mode reference materials unit: % note • when the zoom ratio of either the long edge or short edge is not within 45 - 210%, the zoom ratio of both the long edge and short edge will be 100%. 8.5 x 14 long edge 81 47 100 70 49 76 58 58 58 100 short edge 93 50 100 80 55 96 78 72 61 100 8.5 x ...

  • Page 29: 3.2

    3.2 output size and printing columns/rows 29 3.2 output size and printing columns/rows note • some of the following output sizes may not be available depending on the model of your printer. Feed position - 22 mm feed position - 8.5 mm note • the above values are based on 10 cpi character pitch and 6...

  • Page 30

    30 3 esc/p mode reference materials whole output size note • the above values are based on 10 cpi character pitch and 6 lpi line pitch. 15” continuous-form-paper mode (landscape fixed/flush left) note • the above values are based on 10 cpi character pitch and 6 lpi line pitch. 10” continuous-form-pa...

  • Page 31: Index

    Index 31 index b barcode............................................................ 11 e emulation mode ................................................. 7 esc/p logical printers list ............................. 22 f font cache .......................................................... 9 font lis...

  • Page 32: Mode Menu (Esc/p)

    Mode menu (esc/p) trays 1 - 4 xxx: the paper size of the paper loaded in each tray. Default (bold frame) optional see the [output size] menu items for the paper sizes that can be selected. The paper size of the paper loaded in the selected paper tray will be displayed. Other paper sizes cannot be se...

  • Page 33

    Docuprint c3055/c3055 dx esc/p emulation setting guide fuji xerox printing systems co., ltd. Me3678e2-1 (edition 1) november 2006 copyright© 2006 by fuji xerox co., ltd..