Xerox DocuPrint N17 Function Manual - Procedure C
Version 1.8 2/4/99
9
PROCEDURE C
THE PARALLEL PORT
Warning: Once the upgrade process has begun, DO NOT power off your
printer!
1. Print a Configuration sheet. Keep this page for future reference. For
directions on doing this, reference the section labeled Before you
Upgrade.
2. If your Xerox DocuPrint N17 printer’s User Interface displays
“Ready” go to step 3. If a previous download attempt was not
successful and your printer is not “Ready”, power the printer “Off”
then "ON" while pressing button 1 and button 5 simultaneously.
Continue pressing these two keys until the User Interface displays:
"Entering... Download Mode"
3. To send the upgrade file to the printer:
An OS/2 user should open a command prompt.
A Windows (95/NT/3.1x) user should run from DOS or run a DOS
session. For speed, it is recommended to exit Windows 3.1x and run
from DOS.
The format for the mode command is as follows:
mode
Note: This format is not valid under Windows NT.
The format for the copy command is as follows:
copy
Where:
</b> = binary file
LPT2:, etc.)
Ex: copy /b
4. Wait until User Interface displays "Download Passed… Please
Reboot"