Xerox Fiery EX12 Color server Getting Started Manual - page 31
11
Setting up PostScript and/or PCL printing with Windows 95/98
5.
Click Spool Settings.
6.
Select either “Spool print jobs so program finishes printing faster” or “Print directly
to the printer.”
The selection you make depends on the action you took in step 3 on page 10:
• If you set the Port Timeout in Seconds to 10, you can select either option; however,
spooling is faster.
• If you set the Port Timeout in Seconds to 5, select “Print directly to the printer.”
7.
Select “Disable bi-directional support for this printer” and click OK.
8.
Click Apply.
You are now ready to print from your applications to the Fiery with the parallel port.
9.
Click the General tab.
10.
Click Print Test Page and click OK.
If the test page prints successfully, you are ready to print from the computer.
Perform the following procedure in Windows 95 only if the LPT 1 port is
not
currently set to ECP Printer Port.