Xerox Fiery EX12 Color server Printing Manual - page 131
A
A-7
Print Options
Image Smoothing
Printer’s Default/Automatic/Off/On
Set this setting to On to minimize grainy
output when printing low-resolution
images.
Instructions
Enter instructions to the operator about
the job.
Media Type (Paper Type)
Printer’s default/Normal/Heavyweight/
Extra Heavyweight/Transparency/
Transparency Interleave
Select Transparency
if you will be
printing on transparencies.
(Other) Gamma
Printer’s default/1.0/1.2/1.4/1.6/
1.8/2.0/2.2/2.4/2.6/2.8/3.0
Specify a source gamma value for
printing RGB images, objects, and text.
Setting this option to Printer’s default
produces the same result as the
2.2 setting.
To enable this option, RGB Source
Profile must be set to Other.
For more information, see the
.
(Other) Phosphors
Printer’s default/Hitachi EBU/
Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
Specify a source phosphors value for
printing RGB images, objects, and text.
Setting this option to Printer’s default
produces the same result as the SMPTE
setting. To enable this option, RGB
Source Profile must be set to Other.
For more information, see the
(Other) White Point
Printer’s default/5000 K (D50)/
5500 K/6500 K (D65)/7500 K/9300 K
Specify a source white point value for
printing RGB images, objects, and text.
Setting this option to Printer’s default
produces the same result as the 5000K
(DSO) setting.
To enable this option, RGB Source
Profile must be set to Other.
For more information, see the
.
Output Profile
Printer’s default/Output-1/Output-2/
Output-3/Output-4/Output-5/
Output-6/Output-7/Output-8/
Output-9/Output-10
Specify the output profile to use for the
current print job.
The Printer’s default setting reflects the
setting specified in ColorWise Pro Tools.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see the
.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information