Xerox FreeFlow User Manual - page 43
Xerox FreeFlow® Print Server
IBM® IPDS User Guide
A-1
A
Xerox FreeFlow
®
Server IPDS Network
Connectivity Appendix
Overview
This appendix describes the process of configuring various systems to communicate and print on a
Xerox FreeFlow® Print Server with IPDS using TCP/IP or channel attachment.
Supported environments include:
•
IBM z/OS
®
•
IBM i5/OS
®
•
IBM Infoprint
®
Manager for AIX
®
•
IBM Infoprint
®
Manager for Windows
®
The purpose of this appendix is to help the customer support staff through the system configuration
process, and to provide tips, pointers, and references to more information.
Configuring IBM z/OS
This section discusses the parameters and procedures required to define a Xerox FreeFlow® Print
Server IPDS printer to your System z series
host.
This section is applicable to both JES2 and JES3 environments. Differences between the two are
indicated in notes; otherwise, they are collectively referenced to as “JES”.
TCP/IP Configuration Overview - z/OS
Configuring the Xerox FreeFlow® Print Server IPDS printer with TCP/IP on the z/OS system involves
setting up 4 components:
1.
IPS Manager System Configuration Menu (Refer to
System Configuration
).
Note
The printer IP Address is specified during the initial software load. Set the TCP/IP port
number in the IPS Manager System Configuration dialog
.
2.
TCP/IP for z/OS parameters (Refer to z/OS Communications Server IP Configuration Reference)