Xerox FreeFlow User Manual - page 45
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
Xerox FreeFlow® Print Server
IBM® IPDS User Guide
A-3
Table 5-1. Reference Documents - z/OS
Note:
IBM z/OS manuals are available on the IBM website.
Configuring IBM i5/OS
This section describes the process of configuring an i5/OS system to communicate and print on a
Xerox FreeFlow® Print Server IPDS printer using TCP/IP on a System i series server.
Configuration Overview - i5/OS
Configuring the Xerox FreeFlow® Print Server IPDS printer with TCP/IP on the i5/OS system involves
setting up 3 components:
1.
IPS Manager System Configuration Menu (Refer to
System Configuration
).
Note
The printer IP Address is specified during the initial software load. Set the TCP/IP port
number in the IPS Manager System Configuration dialog.
2.
TCP/IP for i5/OS parameters (Refer to System i Networking TCP/IP Setup)
3.
PSF procedure (Refer to System i Printing Basic printing and IBM Systems - iSeries Printing
Advanced Function Presentation)
Reference Documents - i5/OS
The following documents provide additional information on i5/OS-to-IPDS printer connectivity.
Title
Publication
Number
Print Services Facility for z/OS: Customization
S550-0427
z/OS Communications Server IP Configuration Reference
SC31-8776
z/OS JES2 Initialization and Tuning Guide
SA22-7532
z/OS JES2 Initialization and Tuning Reference
SA22-7533
z/OS JES3 Initialization and Tuning Guide
SA22-7549
z/OS JES3 Initialization and Tuning Reference
SA22-7550
z/OS JES3 Hardware Configuration Definition (HCD)
User's Guide
SC33-7988
z/OS Infoprint Server Customization
S544-5744
z/OS Infoprint Server Operation and Administration
S544-5745