Xerox PHASER 340 Supplementary Manual

Moving Your  Printer

Before turning off the printer, wait for it to display the  

Ready

 message.  

Turn off the printer using the rear-panel 

On/Off

 switch.  

Caution

To avoid damaging the printer, let the printer cool down for at 

least 30 minutes before you move it so that the ink has time to 

solidify.  

Before you move the printer, you’ll want to complete the steps on removing 

the maintenance tray and locking the transit restraint.

Removing the maintenance tray

1.

Remove the maintenance tray from the printer, keeping it level.  

Remove, empty, and replace the waste tray.   Refer to the 

information on the maintenance tray if you need detailed 

instructions.

2.

Place the maintenance tray in a plastic bag and seal the bag.

The maintenance tray contains drum fluid that leaks if the tray is 

tipped.  Keep the maintenance tray level and in a sealed plastic 

bag while transporting it.

Caution

To avoid damaging your printer and invalidating your 

printer’s warranty, remove the maintenance tray before 

moving the printer.  Always store a used maintenance tray in a 

leak-proof package.  When handling the maintenance tray, keep 

it level.  Never ship a partially used maintenance tray.  Contact 

with the drum fluid poses no known health risk.