- DL manuals
- Xerox
- Printer
- Document Centre 220
- Setup Manual
Xerox Document Centre 220 Setup Manual
Summary of Document Centre 220
Page 1
Ab out t h is guid e xerox document centre 220/230/332/340 setup guide 602p35412 july 1999.
Page 2
Xerox corporation 800 phillips road webster new york 14580 prepared by: xerox europe technical centre multinational professional services bessemer road welwyn garden city hertfordshire al7 1he england ©1999 by xerox limited. All rights reserved. Copyright protection claimed includes all forms and ma...
Page 3: Table of Contents
Xerox document centre 220/230/332/340 setup guide page-i ta ble of con tents table of contents a bout t his g uide .............................................................................1-1 related documentation ............................................................1-1 introduction ........
Page 4
Page-ii table of contents walkup screen ......................................................................... 3-5 timers ...................................................................................... 3-6 auto clear ............................................................................
Page 5
Xerox document centre 220/230/332/340 setup guide page-iii ta ble of con tents f ax s etups .......................................................................................5-1 access the fax setups .............................................................5-2 fax terminal setups .............
Page 6
Page-iv table of contents files for polling / files stored for polling ........................... 5-22 fax communication setups ............................................................ 5-24 access fax communication setups ....................................... 5-24 outgoing fax options ..........
Page 7
Xerox document centre 220/230/332/340 setup guide page-v ta ble of con tents foreign interface device .................................................................6-15 a ccess r ights .................................................................................7-1 assign privileges ............
Page 8
Page-vi table of contents.
Page 9: About This Guide
Xerox document centre 220/230/332/340 setup guide page 1-1 ab ou t t h is gu id e a bo u t th is gu id e about this g u ide 1 about this guide this document is a setup guide for the owner, key operator and system administrator of the machine. It contains step by step instructions for customizing the...
Page 10: Introduction
Page 1-2 about this guide introduction welcome to the xerox family of document centre products. As the owner or key operator, the first step is to locate and record the product serial number. The serial number is located inside the left front cover, under the copy/print cartridge. Record the serial ...
Page 11
Xerox document centre 220/230/332/340 setup guide page 1-3 ab ou t t h is gu id e a bo u t th is gu id e about this g u ide xerox welcome center telephone number the telephone number of the xerox welcome center is provided at the time of product installation. For future reference, record the telepho...
Page 12: Conventions
Page 1-4 about this guide conventions throughout this setup guide, some terms are used interchangeably: - paper is synonymous with media. - document is synonymous with original. - page is synonymous with sheet. - document centre 220/230/332/340 is synonymous with the machine. - dc is synonymous with...
Page 13
Xerox document centre 220/230/332/340 setup guide page 1-5 ab ou t t h is gu id e a bo u t th is gu id e about this g u ide italic typeface the italic typeface is used to emphasize a word or phrase. In addition, references to other chapters and publications are displayed in italic typeface. For exam...
Page 14
Page 1-6 about this guide hints hints help to perform a task. An example of a hint is shown below: hint: the machine serial number is located inside the left front cover of the machine under the copy/print cartridge. Cautions cautions are statements that suggest mechanical damage as a result of an a...
Page 15: About Setups
Xerox document centre 220/230/332/340 setup guide page 2-1 abo u t setups about setups 2 about setups the document centre 220/230/332/340 is designed to enable machine and feature default settings to be customized to meet local requirements. This chapter contains an explanation of setups and general...
Page 16: Setup Procedures
Page 2-2 about setups setup procedures during manufacture, certain settings for features and functions of the document centre 220/230/332/340 are programmed into the machine. Once the machine is installed, the setup tools can be used to change these settings to the most suitable settings for the use...
Page 17
Xerox document centre 220/230/332/340 setup guide page 2-3 abo u t setups about setups copy setups enables the copy specific default settings to be changed or set up, including reduce/enlarge, image quality, output, sides imaged, expert image quality, margin shift and erase. Refer to “copy setups” o...
Page 18
Page 2-4 about setups owner tools if a pin is entered that has been assigned ‘owner’ access rights, the user can set up or change: access rights the allocation of key operator, system administrator, auditron administrator (dc332/340) and owner access rights. Refer to “access rights” on page 7-1 for ...
Page 19: Changing The Settings
Xerox document centre 220/230/332/340 setup guide page 2-5 abo u t setups about setups changing the settings switch on to switch on the power to the document centre 220/230/332/340 press the power on/off button which is located on the upper-right side, near the front of the machine. It takes approxi...
Page 20
Page 2-6 about setups the following screen is displayed and contains buttons for the types of setups available. Note: the graphic representations of the user interface screens in this chapter may differ slightly dependent on model or configuration. However, feature descriptions and functionality rem...
Page 21: Machine Setups
Xerox document centre 220/230/332/340 setup guide page 3-1 m a chine set ups machine set ups 3 machine setups this chapter contains the procedures for changing the default settings for the paper trays, date/time, walkup screen, timers, contention, localisation, report languages, touch screen contras...
Page 22
Page 3-2 machine setup note: the graphic representations of the user interface screens in this chapter are based on a fully configured document centre 332/340. The appearance of these interface screens may differ slightly on other models or configurations. However, feature descriptions and functiona...
Page 23
Xerox document centre 220/230/332/340 setup guide page 3-3 m a chine set ups machine set ups paper tray setups À access machine setups as described on page 3-1. À touch the paper trays button. Default tray touch the scroll buttons to select the paper supply default setting - the list contains only t...
Page 24
Page 3-4 machine setup date/time setup À access machine setups as described on page 3-1. À touch the date/time button. Date À touch the date setup button. À touch the scroll buttons to select the preferred display format, for example, the mm-dd-yy format would display 06-10-01 for a current date of ...
Page 25
Xerox document centre 220/230/332/340 setup guide page 3-5 m a chine set ups machine set ups time walkup screen À access machine setups as described on page 3-1. À touch the walkup screen button. À touch the time setup button. À select the preferred display format, 12 or 24 hour - for example eleven...
Page 26
Page 3-6 machine setup timers À access machine setups as described on page 3-1. À touch the timers button. À touch any button to change the setting - a description of each follows. À make changes as required. À touch save to continue. Auto clear with the auto clear feature enabled, the machine retur...
Page 27
Xerox document centre 220/230/332/340 setup guide page 3-7 m a chine set ups machine set ups low power low power mode becomes active after the specified time of machine non-use. When activated, the touch screen is blank and the power saver light is on. When the control panel or touch screen is touch...
Page 28
Page 3-8 machine setup power save (or auto off) the power save or auto off feature function is dependent on machine configuration. Auto off mode/sleep mode (power save) 60 minutes after the last copy/print out the machine will automatically switch into auto off/sleep (power save) mode. The copier ve...
Page 29
Xerox document centre 220/230/332/340 setup guide page 3-9 m a chine set ups machine set ups interrupt button the interrupt feature enables the current job to be stopped and held in memory while another job is executed. When the interrupt job is complete, programming for the first job is retrieved b...
Page 30
Page 3-10 machine setup localization À touch the localization button À select the preferred measurement display format - inches or millimeters. À touch save to continue..
Page 31
Xerox document centre 220/230/332/340 setup guide page 3-11 m a chine set ups machine set ups additional setups note: the graphic representations of the user interface screens in this chapter may differ slightly dependent on model or configuration. However, feature descriptions and functionality rem...
Page 32
Page 3-12 machine setup touch screen contrast customer support number the machine displays the xerox customer support telephone number when the machine status button is pressed. Typically, the correct number is entered by a xerox representative when the machine is first installed. If it is not on th...
Page 33
Xerox document centre 220/230/332/340 setup guide page 3-13 m a chine set ups machine set ups paper sizes machine serial number the machine displays this machine serial number when the machine status button is pressed. This number is required when calling for customer support. À touch the customer s...
Page 34
Page 3-14 machine setup hint: the machine serial number is located inside the left front cover of the machine under the copy/print cartridge. Xerox supplies number / supplies tel. Number the machine displays the xerox supplies telephone number when the machine status button is pressed. À touch the m...
Page 35: Fault Override
Xerox document centre 220/230/332/340 setup guide page 3-15 m a chine set ups machine set ups fault override when a fault occurs on the document center 220/230/332/340, the touch screen displays step-by-step instructions for the walkup user to clear the fault. The instructions include contacting the...
Page 36
Page 3-16 machine setup accessing fault override to access fault override mode, a fault screen must currently be displayed on the touch screen. À press the access button on the control panel. À touch the # and enter a pin (personal identification number) with key operator access rights - see note be...
Page 37
Xerox document centre 220/230/332/340 setup guide page 3-17 m a chine set ups machine set ups unavailable features some types of jobs will not print if the disabled component is required for a default setup. In this case, the machine displays a prompt to check the setups. The following table contain...
Page 38
Page 3-18 machine setup duplex module copy setups, sides imaged, 1 È 2 sided or 2 È 2 sided the machine will not print copy jobs if duplex is disabled and sides imaged 1 È 2 or 2 È 2 are the default settings. The sides imaged button will not be displayed on the touch screen. Duplex module in fax set...
Page 39
Xerox document centre 220/230/332/340 setup guide page 3-19 m a chine set ups machine set ups editing kit copy editing. Finisher in fax setups, fax terminal setups, fax printing options, output selection, left, stapled the machine will not print fax jobs if the finisher is disabled and the default i...
Page 40
Page 3-20 machine setup finisher in copy setups, output, stapled the machine will not print copy jobs if the stapler is disabled and also is the default. The output button will not be displayed on the copy screen. Finisher in fax setups, fax terminal setups, fax printing options, output selection, l...
Page 41
Xerox document centre 220/230/332/340 setup guide page 3-21 m a chine set ups machine set ups finisher in copy setups, output, collated left tray and copy setups, output, uncollated left tray the machine will not print copy jobs if the finisher is disabled and the default output is the left tray. Th...
Page 42
Page 3-22 machine setup foreign interface device in the copy feature with foreign interface device and internal auditron control the copy feature is enabled only for internal auditron control. Foreign interface device in setups, auditron setups, external control device, per-page control, or monitor ...
Page 43
Xerox document centre 220/230/332/340 setup guide page 3-23 m a chine set ups machine set ups high capacity feeder copy high capacity tray high capacity feeder the high capacity feeder the machine will not print copy or fax jobs if the disabled tray is the default tray. The paper supply button will ...
Page 44
Page 3-24 machine setup print queue print network/print controller jobs are temporarily removed from the print queue. When the fault is cleared, the machine attempts to recover the jobs. Tower mailbox in print setups, printer setups, tray settings, destination tray, tower mailbox, bins 1–10 the mach...
Page 45
Xerox document centre 220/230/332/340 setup guide page 3-25 m a chine set ups machine set ups paper tray 2 in machine setups, paper trays, default tray the machine will not print copy or fax jobs if the disabled tray is the default tray. The paper supply button will not be displayed on the copy scre...
Page 46
Page 3-26 machine setup.
Page 47: Copy Setups
Xerox document centre 220/230/332/340 setup guide page 4-1 copy setups copy setups copy setup s 4 copy setups this section contains the procedures for copy setups, which includes programming the default settings for the following features: - reduce/enlarge - image quality - output - sides imaged - e...
Page 48
Page 4-2 copy setups access the copy setups note: the graphic representations of the user interface screens in this chapter may differ slightly dependent on model or configuration. However, feature descriptions and functionality remain the same as described. À press the access button on the control ...
Page 49
Xerox document centre 220/230/332/340 setup guide page 4-3 copy setups copy setups copy setup s reduce/enlarge defaults À touch the reduce/enlarge button. À touch the defaults button. À use the arrow buttons to select the default magnification setting. The default magnification will be selected when...
Page 50
Page 4-4 copy setups normal when users touch normal in the reduce/enlarge column on the touch screen, a selection of preset sizes is displayed. The default value of these presets can be customized to meet local requirements. The factory default presets are: 1. 100% 2. 8 1/2” x 5 1/2” through 8 1/2” ...
Page 51
Xerox document centre 220/230/332/340 setup guide page 4-5 copy setups copy setups copy setup s image quality À access copy setups as described on page 4-2. À touch the image quality button. Text for documents that contain line art and low-quality halftones. Colored backgrounds are automatically sup...
Page 52
Page 4-6 copy setups output À access copy setups as described on page 4-2. À touch the output button. Note: only those selections relevant to the machine configuration will be available. Hint: typically, the center tray is used for copy output, and the left tray is used for fax output. À use the scr...
Page 53
Xerox document centre 220/230/332/340 setup guide page 4-7 copy setups copy setups copy setup s sides imaged À access copy setups as described on page 4-2. À touch the sides imaged button. 1 1 sided single-sided copies from single-sided originals. 2 1 sided single-sided copies from double-sided orig...
Page 54
Page 4-8 copy setups portrait images landscape images. Expert image quality À access copy setups as described at the beginning of this chapter. À touch the expert image quality button. Sharpness adjusts the sharpness of the image - selectthe preferred setting. Grayscale copying (dc220/230) provides ...
Page 55
Xerox document centre 220/230/332/340 setup guide page 4-9 copy setups copy setups copy setup s auto exposure À selecta default setting of on to enhance documents with colored backgrounds or off to disable this feature. Margin shift (dc332/340) programs the default amount of margin shift to move the...
Page 56
Page 4-10 copy setups border erase (dc332/340) À touch the erase button. À touch border or edge erase to change the settings - a description of each follows, or touch off to turn this feature off. À make changes as required. À touch save to continue. À touch the border erase button. À use the scroll...
Page 57
Xerox document centre 220/230/332/340 setup guide page 4-11 copy setups copy setups copy setup s edge erase (dc332/340) À use the scroll buttons to set the default edge erase settings. À touch save. À touch close to exit copy setups..
Page 58
Page 4-12 copy setups.
Page 59: Fax Setups
Xerox document centre 220/230/332/340 setup guide page 5-1 fax setups fax setups fax s e tups 5 fax setups fax setups are divided into two areas: - fax terminal setups:to set and change the defaults for the available fax options such as paper size and type, resolution, and mailbox options. - fax com...
Page 60
Page 5-2 fax setups access the fax setups note: the graphic representations of the user interface screens in this chapter are based on a fully configured document centre 332/340. The appearance of these interface screens may differ slightly on other models or configurations. However, feature descrip...
Page 61: Fax Terminal Setups
Xerox document centre 220/230/332/340 setup guide page 5-3 fax setups fax setups fax s e tups fax terminal setups this section contains the procedures for the following fax terminal setups: - fax terminal options - fax printing options - fax report options - fax panel defaults - fax mailboxes - fax ...
Page 62
Page 5-4 fax setups fax terminal options À access fax terminal setups as described on page 5-3. À touch the fax terminal options button. Local id according to the federal law, the document centre 220/230/332/340 must be programmed with an identification number. The identification number, or local id...
Page 63
Xerox document centre 220/230/332/340 setup guide page 5-5 fax setups fax setups fax s e tups local name the local name is the name allocated to this particular machine. For example, it could indicate the location of the machine - for example, ‘copier west’, or be the company name. À touch the local...
Page 64
Page 5-6 fax setups company logo company logo is used in the header of the transmission report and in the cover letter for fax documents to identify the organization sending the fax. À touch the second local name button on the right of the screen. À use the keypad on the screen to enter the local na...
Page 65
Xerox document centre 220/230/332/340 setup guide page 5-7 fax setups fax setups fax s e tups delayed start time users can scan a document and delay its transmission start time. If they do not specify the delayed start time, the machine uses the default delayed start time that is entered here. À tou...
Page 66
Page 5-8 fax setups long document (dc332/340) dialing digits reporting (dc332/340) this default selects whether the first or last 20 digits of a telephone number are displayed on reports and headers. À touch the second delayed start time button on the right of the screen. À use the scroll buttons on...
Page 67
Xerox document centre 220/230/332/340 setup guide page 5-9 fax setups fax setups fax s e tups fax printing options À access fax terminal setups as described on page 5-3. À touch the fax printing options button. Receive reduction with this feature enabled, the document centre 220/230/332/340 automati...
Page 68
Page 5-10 fax setups page margin this feature defines the maximum amount of space between the length of an incoming fax and the length of the paper on which the fax is to be printed. The page margin setting affects the bottom of the page. It avoids image loss if users are printing onto a smaller siz...
Page 69
Xerox document centre 220/230/332/340 setup guide page 5-11 fax setups fax setups fax s e tups duplex printing this feature sets the default duplex printing setting for incoming fax documents and reports. All 1 sided: prints fax documents and reports single-sided. All 2 sided: prints fax documents a...
Page 70
Page 5-12 fax setups output selection programs the output tray for incoming fax documents. Hint: typically, the left tray is the default fax tray; the center tray is the default copy tray. If a finisher is installed, the options will include finisher/stapled. À touch the paper attributes button. À t...
Page 71
Xerox document centre 220/230/332/340 setup guide page 5-13 fax setups fax setups fax s e tups a3 È 11" x 17" programs incoming fax documents to be printed on a different size paper. For example, an incoming a3 size (european standard) fax can be trimmed to print on 11" x 17" paper. Alternatively, c...
Page 72
Page 5-14 fax setups fax report options À access fax terminal setups as described on page 5-3. À touch the fax report options button. Activity report programs the machine to automatically print a report of phone line activity. Auto print prints an activity report when the number of outgoing and inco...
Page 73
Xerox document centre 220/230/332/340 setup guide page 5-15 fax setups fax setups fax s e tups transmission report programs the machine to print the status of each transmission and displays a reduced image of the first page of the original document after each transmission is completed. À touch the b...
Page 74
Page 5-16 fax setups mailbox report programs the machine to automatically print a report informing the mailbox owner each time a fax is received to his or her mailbox. Fax panel defaults À access fax terminal setups as described on page 5-3. À touch the fax panel defaults button. Resolution sets one...
Page 75
Xerox document centre 220/230/332/340 setup guide page 5-17 fax setups fax setups fax s e tups standard (200 x 100) reduces communication time - use for text documents. Fine (200 x 200) combines features of standard and super fine resolution - use for most fax documents and for black and white graph...
Page 76
Page 5-18 fax setups forced 4800 (document centre 220/230) used when fax communications are susceptible to errors.This mode is slower, but it is less susceptible to errors. Communication mode (dc332/340) this feature sets the default communication mode used for transmission to a remote fax machine. ...
Page 77
Xerox document centre 220/230/332/340 setup guide page 5-19 fax setups fax setups fax s e tups the speed can also be selected manually. The lower the speed, the less chance errors will occur during transmission. The kilo bits per second (kbps) speeds available are 33.6, 31.2, 28.8, 24.0, 21.6, 19.2 ...
Page 78
Page 5-20 fax setups to delete a mailbox to add or edit a mailbox À touch a mailbox in the list to select it. Touch the scroll buttons to move up and down the list. À follow the instructions below to delete, edit or add a mailbox. À touch the delete mailbox button. À touch confirm to delete the sele...
Page 79
Xerox document centre 220/230/332/340 setup guide page 5-21 fax setups fax setups fax s e tups fax file management À access fax terminal setups as described on page 5-3. À touch the fax file management button. À touch the mailbox password button. À use the keypad on the control panel to enter a four...
Page 80
Page 5-22 fax setups mailbox files / failed fax files displays a list of fax jobs that were unsuccessful after attempting to send the job a specified number of times depending on the current settings. Auto delete automatically deletes all failed fax documents. Delete in 24 hours (dc220/230) automati...
Page 81
Xerox document centre 220/230/332/340 setup guide page 5-23 fax setups fax setups fax s e tups auto delete automatically deletes stored fax files after they have been transmitted. Keep keeps stored fax files after they have been transmitted until they are manually deleted. À touch the files stored f...
Page 82: Fax Communication Setups
Page 5-24 fax setups fax communication setups this section contains the procedures to set the following: - outgoing fax options - incoming fax options - line use restriction note: the default password is #22222 which may be used if pins have not yet been assigned. Access fax communication setups À a...
Page 83
Xerox document centre 220/230/332/340 setup guide page 5-25 fax setups fax setups fax s e tups outgoing fax options À access fax communication setups as described on page 5-24. À touch the outgoing fax options button. Dialing type this setting programs a tone or pulse dialing. Note: this feature mig...
Page 84
Page 5-26 fax setups pause time this feature sets the amount of time for dial pauses. Redial management redial count sets the number of times the machine will automatically attempt a redial if a connection cannot be made. Redial interval sets the time intervals in minutes between redials. Note: this...
Page 85
Xerox document centre 220/230/332/340 setup guide page 5-27 fax setups fax setups fax s e tups line monitor line monitor audibly monitors a transmission through the internal speaker until a connection is made. After connection, the line monitor is removed. Line monitor volume sets a default volume f...
Page 86
Page 5-28 fax setups batch send transmits several pending documents to one destination during a single phone call. Resend count automatically re-transmits a failed page if a page error occurs. À if the line monitor feature is set to on, touch the line monitor volume button. À select the volume setti...
Page 87
Xerox document centre 220/230/332/340 setup guide page 5-29 fax setups fax setups fax s e tups incoming fax options À access fax communication setups as described on page 5-24. À touch the incoming fax options button. Auto answer delay sets the delay in seconds before incoming calls are automaticall...
Page 88
Page 5-30 fax setups ring volume junk fax prevention this feature programs the machine to only accept incoming fax documents from remote machines whose local id numbers are programmed into the dial directory. All other fax documents are rejected thereby ensuring junk fax documents such as advertisem...
Page 89
Xerox document centre 220/230/332/340 setup guide page 5-31 fax setups fax setups fax s e tups receive header print (dc332/340) secure fax receive (dc332/340) line use restriction (dc332/340) where more than one line is connected to the document centre 332/340, this feature enables one line to be re...
Page 90
Page 5-32 fax setups À touch the line use restriction button. À touch the line 1 or line 2 button. À select receive only to reserve this line for incoming fax documents. À alternatively, select transmit and receive to enable the chosen line to accept incoming and outgoing fax documents. À touch save...
Page 91: Auditron Setups
Xerox document centre 220/230/332/340 setup guide page 6-1 a udi tr on setup s au di tr on setups 6 auditron setups the auditron feature enables machine usage to be tracked and / or controlled, preventing unauthorized access to the machine and enabling recharges for prints to be applied.The options ...
Page 92: Access Auditron Setups
Page 6-2 auditron setups access auditron setups À press the access button on the control panel. A pop-up window will be displayed on the touch screen. À press the # button on the control panel and use the number keypad to enter an auditron administrator pin - see note. À touch enter in the pop-up wi...
Page 93
Xerox document centre 220/230/332/340 setup guide page 6-3 a udi tr on setup s au di tr on setups internal auditron - dc332/340 internal auditron setups on the dc332/340 models covers the following topics: 1. Auditron enable setups—toset up the auditron for one or more services. 2. Account setups—to...
Page 94
Page 6-4 auditron setups copy enables/disables auditron for copy jobs. Fax enables/disables auditron for fax jobs. Scan enables/disables auditron for scan jobs. Print enables/disables auditron for network print jobs reports enables/disables auditron for printing reports. Note: the choice available w...
Page 95
Xerox document centre 220/230/332/340 setup guide page 6-5 a udi tr on setup s au di tr on setups add/modify accounts À touch the account setups button. À make selections as required - see below for a description of each. À touch save to continue. To add an account: À touch the add account button À ...
Page 96
Page 6-6 auditron setups all limits the same use the popup keypad to enter a limit in units of 100 to restrict the number of prints which can be assigned to this account for all the services selected. Change limit use the popup keypad to enter a limit in units of 100 to restrict the number of prints...
Page 97
Xerox document centre 220/230/332/340 setup guide page 6-7 a udi tr on setup s au di tr on setups reset all counters reset all limits delete all accounts À to reset the counters for all accounts to zero, touch the reset all counters button at the top of the screen. À touch confirm. À touch close to ...
Page 98
Page 6-8 auditron setups job limit policy - dc332/340 this feature sets machine behavior when the user’s account limit has been reached. When the limit is reached, the machine will either stop the current job immediately or let the job finish and go over the limit. À access auditron setups as descri...
Page 99
Xerox document centre 220/230/332/340 setup guide page 6-9 a udi tr on setup s au di tr on setups À access auditron setups as described on page 6-2. À touch the internal auditron button. Scroll list use the scroll buttons to access each account to review the counters associated with that account. Th...
Page 100
Page 6-10 auditron setups internal auditron - dc220/230 internal auditron setups on the dc220/230 models cover the following topics: 1. Service access setup—toset up the auditron for one or more services. 2. Account setup—to set up the auditron accounts, delete accounts and to set counter limits for...
Page 101
Xerox document centre 220/230/332/340 setup guide page 6-11 a udi tr on setup s au di tr on setups off (no auditron) enables/disables auditron. Auditron without account limits enables auditron and allows unlimited usage for each account. Auditron with account limits enables auditron and allows usage...
Page 102
Page 6-12 auditron setups add accounts À access auditron setups as described on page 6-2. À touch the internal auditron button. À touch the account setup button. À make selections as required - see below for a description of each. À touch save to continue. À touch the add account button. À enter the...
Page 103
Xerox document centre 220/230/332/340 setup guide page 6-13 a udi tr on setup s au di tr on setups scroll buttons a new limit can be entered to restrict the number of prints which can be assigned to this account. Unlimited there is no limit on the number of prints that can be assigned to this accoun...
Page 104
Page 6-14 auditron setups terminate job if set to on, the machine will stop the job as soon as the account limit has been reached - any pages committed to print will be allowed to print. Delete pending jobs if set to on, when an account limit is reached all pending jobs assigned to this account will...
Page 105: Foreign Interface Device
Xerox document centre 220/230/332/340 setup guide page 6-15 a udi tr on setup s au di tr on setups foreign interface device a foreign interface device might be a coin-operated device, a bill acceptor, a card reader, or a network controlled tracking system installed on the system. The device must ini...
Page 106
Page 6-16 auditron setups.
Page 107: Access Rights
Xerox document centre 220/230/332/340 setup guide page 7-1 access rights a c ce ss ri ght s 7 access rights personal identification numbers (pins) and privileges are assigned to users who need to access the setup tools. Up to 100 pins, each between 4 and 16 digits long, may be assigned.There are dif...
Page 108
Page 7-2 access rights each privilege determines the right to set up the default settings for a specified set of functions, as shown in the table below. More than one privilege can be assigned to an individual user. Customer preference determines whether individual privileges are assigned to various...
Page 109
Xerox document centre 220/230/332/340 setup guide page 7-3 access rights a c ce ss ri ght s the following table illustrates a situation where various privileges are assigned to five users. - pin 1234 enables its assigned user to enter the setup tools and access only the auditron and access setup fea...
Page 110
Page 7-4 access rights assign privileges À touch the access button on the control panel. A pop-up window will be displayed on the touch screen. À press the # button on the control panel, and enter a pin with owner privileges - see note below. À touch enter in the pop-up window. Note: the factory def...
Page 111
Xerox document centre 220/230/332/340 setup guide page 7-5 access rights a c ce ss ri ght s add pin set user privileges À touch the access rights button. À touch add pin À using the pop-up keypad, enter a number between 4 and 16 digits. À touch save. À use the search facility or scroll buttons to se...
Page 112
Page 7-6 access rights delete pin À use the search facility or scroll buttons to select the user pin number to be deleted À touch delete pin. À touch confirm..
Page 113: Index
Xerox document centre 220/230/332/340 setup guide page 8-1 index ind e x 8 index numerics 2-sided printing 5-11 2-sided, sides imaged 4-7 a a3 to 11" x 17" 5-13 about this guide 1-1 access button 2-6 , 3-1 , 5-2 access rights 7-1 access setups 2-5 account setup (dc220/230) 6-11 account setup (dc332/...
Page 114
Page 8-2 index double-sided printing 5-11 duplex printing 5-11 duplex, sides imaged 4-7 e edge erase (dc332/340) 4-11 erase (dc332/340) 4-9 expert image quality 4-8 f failed fax files 5-22 fault override 3-15 fax communication setups 5-24 fax file management 5-21 fax mailboxes 5-19 fax options, inco...
Page 115
Xerox document centre 220/230/332/340 setup guide page 8-3 index ind e x on 2-5 orientation 1-4 original type 5-17 output defaults 4-6 output selection 5-12 owner privileges 7-5 owner tools 2-3 p page margin 5-10 panel defaults, fax 5-16 paper attributes 5-11 paper sizes 3-13 paper tray priority 3-3...
Page 116
Page 8-4 index system administrator privileges 7-5 system administrator tools 2-3 system serial number 1-2 , 3-13 t telephone numbers 1-3 terminate immediately 6-8 , 6-14 terminate on job boundary 6-8 time setup 3-4 timers 3-6 tone 5-25 tools auditron administrator 2-3 key operator 2-2 owner 2-3 sys...