DL manuals
Xerox
Printer
Phaser 4500
Network Manual

Xerox Phaser 4500 Network Manual

Other manuals for Phaser 4500: Brochure, Quick Reference Manual, Brochure, Supplementary Manual, Voluntary Product Accessibility Template, Reference Manual, Supplementary Manual, Setup Manual, Upgrade Manual, User Manual, Service Manual, Reference Manual, Service Manual, Reference Manual, Quick Reference Manual

Page of 8

Download

Print this page

Bookmark us

Phaser™ 4500 Laser Printer

3-2

Connections and IP Address

This topic includes:

■

"Printer Setup" on page 3-2

■

"Connection Setup" on page 3-6

Printer Setup

Ethernet Connection (Recommended)

An Ethernet connection is recommended because it is faster than a USB cable connection. It

also allows the user direct access to CentreWare IS.

Network Connection

Use an Ethernet connection with two twisted-pair (Category 5/RJ-45) cables and an Ethernet

hub. Connect the computer to the hub with one cable, then connect the printer to the hub with

the second cable. Connect to any port on the hub except the uplink port. TCP/IP and EtherTalk

are the most common protocols used with Ethernet cables. To print using TCP/IP, each

computer and printer requires a unique IP address. Go to “Setting an IP Address” in this

section.

Standalone (Cable or DSL) Network Connection

For information about setting up a cable or DSL connection for your printer, go to

www.xerox.com/office/infoSMART

to view Document # 33188, entitled Basic TCP/IP

Tutorial and Home Networking Guidelines.

Setting an IP Address

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the printer directly to

your computer over Ethernet, follow the procedure for automatically setting the printer’s IP

address.

The printer and computer(s) must have unique IP addresses. It is important that the addresses

are similar, but not the same. For example, your printer can have the address 192.168.1.2 while

your computer has the address 192.168.1.3. Another device can have the address 192.168.1.4.

For more information, go to

www.xerox.com/office/infoSMART

to view Document # 18545.

The information in this section is also stored as an information page in your printer.

Use the front panel to quickly print this information in the future.

1 2 3 4 5 6 7 Next › »

Summary of Phaser 4500

Page 1
Phaser™ 4500 laser printer copyright © 2004 xerox corporation. All rights reserved. 3-2 connections and ip address this topic includes: ■ "printer setup" on page 3-2 ■ "connection setup" on page 3-6 printer setup ethernet connection (recommended) an ethernet connection is recommended because it is f...
Page 2
Connections and ip address phaser™ 4500 laser printer 3-3 automatically setting the printer’s ip address use the phaser installer on the printer installer and utilities cd-rom to detect and/or assign an ip address to your printer. For further instructions, insert the printer installer and utilities ...
Page 3
Connections and ip address phaser™ 4500 laser printer 3-4 3. Select the ip address tab, then click specify an ip address. 4. Enter an ip address and subnet mask, then click ok. 5. If prompted, click ok to restart windows. Macintosh os 9.X tcp/ip 1. Click the apple icon, then select the controls pane...
Page 4
Connections and ip address phaser™ 4500 laser printer 3-5 macintosh os x (10.1 and higher) 1. Install the printer driver from the printer installer and utilities cd-rom. 2. Open the print center utility. (on the macintosh hard drive, open the applications folder, then open the utilities folder.) 3. ...
Page 5: Connection Setup
Connections and ip address phaser™ 4500 laser printer 3-6 connection setup installing the printer driver to download the latest printer drivers, go to www.Xerox.Com/office/support . Windows 98 or later and windows 2000 or later install the printer driver from the printer installer and utilities cd-r...
Page 6
Connections and ip address phaser™ 4500 laser printer 3-7 available in the drop-down window, it is recommended that you contact your system administrator or apple computer incorporated for assistance. ■ for rendezvous, select the appropriate printer from the list that is displayed. For more informat...
Page 7
Connections and ip address phaser™ 4500 laser printer 3-8 changing or modifying the ip address using centreware internet services (is) centreware is is a printer administration and support tool using web technology. With centreware is software, you can access printer status and manage your printer o...
Page 8
Connections and ip address phaser™ 4500 laser printer 3-9 3. Select properties. 4. Select the protocols folder on the left sidebar. 5. Select tcp/ip. 6. In the boot/dhcp settings section, set the bootp/dhcp option to on. 7. To enable ddns, enter the following ddns/wins settings information: ■ ddns -...